Examples of 'squelch level' in a sentence
Meaning of "squelch level"
squelch level - Squelch level refers to the threshold level in a communication system below which the signal is considered noise and is suppressed or muted
How to use "squelch level" in a sentence
Basic
Advanced
squelch level
The squelch level is fixed at a mean value.
Move closer to receiver or reduce squelch level.
Toggles squelch level between tight and normal.
Press the key to increase the squelch level tighten.
Lower the squelch level to hear weaker signals.
Transmitter is too far away from receiver or squelch level set too high.
Raise the squelch level to reduce channel noise.
Press the programmed Squelch button to toggle squelch level between normal and tight.
Is the squelch level of the receiver.
Press the key programmed as Squelch Level.
Always keep the squelch level of the receiver as low as.
To listen to a weak or distant station, reduce the squelch level 0 is squelch open.
Do not set the squelch level higher than necessary.
If the scanner picks up unwanted partial or very weak transmissions, increase the squelch level.
The squelch level must be adjusted according to the background noise.
See also
You can manually adjust the squelch level using this function.
The squelch level determines what strength a signal must have to unmute the speaker.
The table below provides guidelines on the squelch level vs. transmission distance.
Setting the squelch level higher filters out noise and lets only actual radio transmissions through.
If interference noise occurs, adjust the squelch level until the interference noise goes away.
The Squelch level may need to be adjusted.
So, it will be better for you to select the Normal Squelch level.
Check that the squelch level is properly adjusted ; the programmed configuration is.
Press to select the desired squelch level from 0 to 9.
Check that the squelch level is properly adjusted ; the programmed configuration is the correct.
SL ” appears on the display, followed by the current squelch level.
SqUELCH knob - Regulates the squelch level noise silencer in absence of signals.
Squelch level control 28 level and off.
Appears when the Squelch Level setting is activated . SL.
Squelch level is too high Adjust squelch level 5.3.
By default, the Squelch level is set on level 5.
SQ+ / VOL, push to increase the volume and the squelch level.
Press the Set key, and the squelch level adjustment display " RF > " appears on the screen.
SQ - / VOL, push to reduce the volume and the squelch level.
Using the mode selector ( D ), the squelch level of the radio may be fine-tuned.
Hold down F and 1 sql, the current squelch level is displayed.
Turn the Encoder knob and select the desired squelch level ( 9 different levels are available ) ;.
Turn the Encoder knob and select the desired Squelch level ( the levels avai - lable are 10 ) ;.
You'll also be interested in:
Examples of using Level
Show more
The deepest level is usually the first
Automakers took the fight to a new level
Check oil level and fill if needed
Examples of using Squelch
Show more
The squelch level is fixed at a mean value
Set frequency and squelch threshold again
The squelch control is preset at the factory
