Examples of 'stabilizer feet' in a sentence
Meaning of "stabilizer feet"
stabilizer feet - This phrase typically describes a component or feature of a device or equipment designed to provide stability or balance. Stabilizer feet are usually attached to the bottom or base of an object to prevent it from tipping, sliding, or wobbling. They are commonly found in appliances, furniture, machinery, or any other item where stability is crucial.
How to use "stabilizer feet" in a sentence
Basic
Advanced
stabilizer feet
Install stabilizer feet on the rack as follows.
Clean the underside of the stabilizer feet.
Install the stabilizer feet on your system.
Remove the plastic fasteners from the stabilizer feet.
Turn stabilizer feet counterclockwise to raise indoor cycle.
Install the front stabilizer feet.
Stabilizer feet identical to those on the fixed leg version.
Install front and side stabilizer feet on a standalone rack.
Turn stabilizer feet clockwise to lower the indoor cycle.
Remove the plastic fasteners attached to the stabilizer feet.
The stabilizer feet help prevent the rack from tipping over.
Installing systems in a rack without the front and side stabilizer feet.
Stabilizer feet can be installed on each side to securely brace the rack.
You must remove the side panels in order to install the side stabilizer feet.
Therefore, always install and anchor the stabilizer feet before installing components.
See also
See the documentation included with your system on installing the system stabilizer feet.
Always level the rack and install the stabilizer feet before you install.
Refer to the Dell rack 's installation guide for instructions on installing the stabilizer feet.
Complete with the addition of stabilizer feet and a set of 2 connector kits sold separately.
Installing systems in a rack without the front and side stabilizer feet installed and anchored.
Cupboard rests on 4 ABS stabilizer feet matching the cupboard shell.
Therefore, always install the stabilizer feet before.
Base stands on 4 adjustable stabilizer feet mounted flush in 10 mm diameter openings.
For an existing configuration, you must remove the stabilizer feet from the system before.
You'll also be interested in:
Examples of using Stabilizer
Show more
Connection of the stabilizer to mains has to be done by author
Add fresh gasoline with fuel stabilizer
Use a backing of stabilizer or interfacing to avoid puckering
Examples of using Feet
Show more
Stay five feet ahead of me at all times
This is what gets them to their feet
My flat feet ai not suited for marching
