Examples of 'starter grip' in a sentence
Meaning of "starter grip"
starter grip - A term typically used in sports or machinery to refer to the initial hold or grasp needed to begin a motion or activity
How to use "starter grip" in a sentence
Basic
Advanced
starter grip
Do not let go of the starter grip as it returns.
Pull starter grip until engine runs.
Always pull the starter grip briskly.
Starter grip until the engine starts.
Pull the starter grip once.
Open spray gun before pulling the starter grip.
Return the starter grip handle slowly.
Repeatedly pulling and releasing the starter grip with the.
Pull the starter grip until resistance is felt.
Take care not to slacken the wire toward the starter grip side.
Return the starter grip gently.
The starter grip should now stand straight up on the fan housing.
Do not allow the starter grip to snap back.
Lead starter grip slowly back to starter housing.
Hold trigger and pull starter grip until engine runs.
See also
Pull starter grip slowly up until initial resistance is felt.
Leave the throttle trigger in the idle position and pull the starter grip.
Pull the starter grip slowly with your.
More the throttle setting lever to the idle position and pull the starter grip.
Do not hold pull starter grip tightly in hand.
The starter grip and rope is pulled to start the machine.
Pull briskly on the starter grip of the starting rope.
The starter grip must locate firmly in the guide bushing.
N Pry the cap out of the starter grip.
Pull the starter grip slowly until feeling compression.
N Use a screwdriver to pry the rope out of the starter grip.
Do not allow starter grip to snap back against engine.
N Remove the remaining rope from the rotor and starter grip.
Pulling starter grip operates recoil starter to crank engine.
N Thread the new rope through the starter grip and tie a simple overhand knot.
The starter grip must sit firmly in the rope bushing.
N Thread the new rope through the starter grip and tie one of the knots shown.
Pull starter grip and rope sharply until engine attempts to run.
Empty the pump by pulling on the starter grip and rope about 6 times.
Pull the starter grip sharply until engine attempts to run.
Pull the starter rope slowly until resistance is felt, then return the starter grip gently.
Pull the starter grip until the engine starts.
Do not exceed 20 degrees from horizontal when pulling the starter grip.
Pull the starter grip until you feel resistance.
Opens and closes the fuel inlet 11 Recoil starter grip.
Do not allow the starter grip to be retracted without control.
Pull starter rope B8 ( 4 ) rapidly and return starter grip slowly.
Pull the recoil starter grip to start the engine.
Starter grip, Pull the starter grip lightly until resistance is felt, and then pull briskly.
Damage may result if the starter grip is pulled while the engine is running.
Starter Grip without ElastoStart, Use a screwdriver to pry the rope.
N Pull the starter grip steadily.
Starter Grip, Pulling starter grip operates recoil starter to crank engine.
Do not pull the starter grip more than 4 times.
The starter grip must be firmly seated in the rope guide bushing.
You'll also be interested in:
Examples of using Grip
Show more
Turn the throttle grip to reduce engine
This grip provides comfortable cutting control
Maintain a firm grip on the power tool
Examples of using Starter
Show more
Starter fluid or firelighters should not be used
Then pull recoil starter briskly again
Oem starter rebuild kits for atv
