Examples of 'starting torque' in a sentence
Meaning of "starting torque"
starting torque - Starting torque is the measure of the rotational force produced by a motor or engine at the moment of starting. It is an important consideration in the design and operation of machinery, as the starting torque must be sufficient to overcome initial inertia and accelerate the equipment
How to use "starting torque" in a sentence
Basic
Advanced
starting torque
The motor is marked by high starting torque characteristics.
Maintain fi rm grip on router when starting motor to resist starting torque.
A large amount of starting torque is required.
Also keep firm grip on tool to resist starting torque.
Direct drive for high starting torque facilitates start in case of emergency.
Keep a firm grip on the tool to resist starting torque.
The system described allows full starting torque in either direction of rotation.
This allows the cap to be opened with a smaller starting torque.
The starting torque can be very limited because of the imperfect field of rotation.
It also has a small starting torque.
Starting torque is not primarily a function of the consistency or channel properties of the grease.
Symple installation with high starting torque and current.
The starting torque is determined at will by the driver ;.
These were used where high starting torque was required.
Maintain a firm grip with both hands on the tool to resist starting torque.
See also
The machine boasts a large starting torque and its rotations are easy to regulate.
Maintain firm grip with both hands on router to resist starting torque.
This must have high starting torque to start the kiln with a large eccentric load.
Localized contact can be removed and a starting torque can be decreased.
For example, starting torque for these machines is low.
This enables use of a less costly lower starting torque motor if desired.
Thereby, the starting torque of the motor may be reduced.
The RollerDrive must be fixed and able to withstand the following starting torque.
This motor is used when both a high starting torque and good speed regulation is needed.
The use of a frequency drive can cause a decrease of the motor starting torque.
Helical magnets to improve starting torque and predictability at low speeds ;.
Maintain firm grip with both hands on laminate trimmer to resist starting torque.
Find the medium / high starting torque electric motor you need.
When doing this, be careful to observe the starting torque.
Nevertheless, the starting torque decreases, which can cause some problems in starting at full load.
In some models two generators are used to decrease the starting torque of the turbine.
The starting torque of the screws is 5 Nm.
Full use is made of the generous ratio between starting torque and rated torque.
LUBRICATION LIMITATIONS Starting torque in grease-lubricated applications typically increases significantly at cold temperatures.
The correcting moment is combined with the preset starting torque used to control the motor.
In the latter case, one should dispose of an electromechanical device having a considerable starting torque.
However, shunt motors lack the inherent high starting torque of series-excitation motors.
Another important advantage over squirrel-cage motors is higher starting torque.
However, the pressures required depend on the starting torque needed to turn the driven member.
Smooth rotor disks were originally proposed, but these gave poor starting torque.
Second, it increases the starting torque in the CCW direction for starting.
However, they offer a less effective starting torque.
MS / MN Ratio of starting torque to rated torque.
Check maximum number of stops / starts and permissible starting torque.
A torque signal CMTH corresponding to the starting torque of this heat engine 2 is then detectable.
These are called capacitor-start motors, and have relatively high starting torque.
The starter-generator has to provide high starting torque to start the main engine.
These are called capacitor-start motors, that have relatively high starting torque.
Torque, How much starting torque will your application need?
Applications include automotive, hoists, lifts and cranes as it has a high starting torque.
You'll also be interested in:
Examples of using Torque
Show more
The resulting torque introduces the rotation
Torque for terminal box cover screws
Low level inducement torque reduction scheme
Examples of using Starting
Show more
I am really starting to like your new apartment
Use the following sentence as a starting point
I am starting to get a little worried about you
