Examples of 'status leds' in a sentence
Meaning of "status leds"
refers to Light Emitting Diodes used to indicate the current state or condition of a device or system
How to use "status leds" in a sentence
Basic
Advanced
status leds
Status LEDs for the left channel.
At least three status LEDs should be lit.
Status leds located on the top of the amplifier.
Environmentally aware status LEDs for use in drones.
Two status LEDs controllable from software.
Front panel port status LEDs.
These status LEDs indicate the arming level.
Function test of the status leDs.
The status LEDs flash blue while charging.
Operation of the signalling status LEDs.
Status leds operating principles activating the outputs.
The following section describes the status LEDs.
Status LEDs change to red to indicate a fault condition.
Observe the battery status LEDs.
Status LEDs provide information at a glance.
See also
Charging dock with status LEDs.
Status LEDs visible from afar.
The wireless router has the following status LEDs.
The status LEDs are solid blue when charging is complete.
The firmware revert microswitch between the status LEDs.
The status LEDs do not illuminate after pushing the.
Verification of correct functionality with the help of status leds.
Status LEDs indicate video signal for each channel.
This task causes the status LEDs on the device to blink.
The sweeping robot is switched on but none of the status LEDs are on.
Separate status LEDs for normal and reverse line polarity.
The cleaning robot is switched on but none of the status LEDs are on.
There are three status LEDs on the right side of the display.
The following tables describe the status codes of the three status LEDs.
Operational status LEDs.
Green and red status LEDs and test pushbutton for manual actuation.
Turning the rotary switches will toggle the following status LEDs on and off.
Bridge firmware is updating if the status LEDs are progressing around the bridge in sequence.
These status LEDs illuminate to indicate which stage of the cycle is currently running.
There is a problem if one or more status LEDs have the following behaviour.
The switch status LEDs remain active when the display is switched off.
No laser beam is exiting the transmitter Tx and Rx status LEDs are lit.
Plus it has a four status LEDs that keep you informed of remaining capacity.
A short push on the status button will activate the Status LEDs.
Instead the status LEDs emit blue light periodically one after the other.
It should be charged whenever the Blue Status LEDs indicate the unit is low.
The Status LEDs illuminate red during the charging process.
ECOTRON segment display Clearly segmented display including six status LEDs.
The keyboard Status LEDs should light up.
Status LEDs GSM and vehicle status.
One or more Channel Status LEDs remained illuminated in red.
Error codes of the LAN adapter LAN adapter errors are indicated by the status LEDs.
The Status LEDs on the upper side of the balancer charger illuminate green.
Check that the camera 's status LEDs indicate the correct.
Status LEDs and Ethernet Port LEDs.
You'll also be interested in:
Examples of using Status
Show more
Tax status and withholding tax receivables
Improving the conservation status of migratory landbirds in
Status of assessed contributions to the regular budget
Examples of using Leds
Show more
The LEDs then turn off automatically
Then the two LEDs flash red
Read LEDs to determine cable wiring status
