Examples of 'steam control' in a sentence
Meaning of "steam control"
Steam control: Typically refers to the regulation or adjustment of steam pressure in a mechanical system
How to use "steam control" in a sentence
Basic
Advanced
steam control
Set the steam control to a lower setting.
If the appliance has variable steam control.
The steam control is set to position see.
But not just any steam control valve.
The steam control is not set to the position.
Turn the variable steam control to the maximum.
Steam control set on dry position.
Position and the steam control to the position.
Steam control is set too high in conjunction with a low temperature.
Improvement in the steam control arrangement of a cooking oven.
Steam control valve.
Do not bend or damage the steam control needle.
Move the steam control lever to a lower setting.
Unplug the appliance and set the steam control to position.
Set the steam control lever to.
See also
An investment in steam control.
The steam control may have been set to position.
I matched it to a steam control valve.
The steam control will then spring up slightly.
You have not retained the steam control in the maximum position.
The steam control has not been pressed long enough.
The appliance is ready for use once the steam control light extinguishes.
Turn the steam control button back again.
Hold the iron over the sink and set the steam control to.
Set the steam control to position.
Before filling the water tank set the steam control in the position.
The variable steam control to its lowest position.
Wait for the thermostat light to go out before activating the steam control button.
The steam control is set to minimum.
You should not use this option if steam control is set to less than half.
Use the steam control to adjust the amount of steam.
With the fixed filter holder system it will light up on activating the steam control.
Set the steam control to and unplug the iron.
Always allow iron sufficient time to heat up before activating the variable steam control.
Check that the steam control is set to the position.
Hold the iron over the sink and turn the steam control to the.
Turn the steam control to the required setting area.
Set the temperature control dial and variable steam control to their maximum positions.
Turn the steam control knob to the required position.
Hold the cloth close to the steam opening and turn the steam control button.
Set the variable steam control to the desired position.
This iron is equipped with Auto steam control.
Turn the variable steam control to the minimum position.
A steam control valve should not be used for warm up of a steam distribution line.
You did not keep the steam control in the turbo steam position.
Remove the mains plug from the wall socket and set the steam control to position O.
Turn the steam control button clockwise to stop the steam.
Adjust the temperature setting and then set the steam control according to the table below.
The steam control dial has not been set to steam production.
This mop has a similar steam time to the Vileda and also has adjustable steam control.
You'll also be interested in:
Examples of using Steam
Show more
Humid steam button depending on the model
Never immerse the steam tank in water
Lift steam wand to remove milk jug
