Examples of 'stop lamp' in a sentence
Meaning of "stop lamp"
stop lamp - This phrase refers to the rear light on a vehicle that illuminates when the brakes are applied
How to use "stop lamp" in a sentence
Basic
Advanced
stop lamp
Stop lamp and centre stop lamp.
Current requirements on stop lamp illumination.
Stop lamp with two levels of intensity.
Deceleration by engine braking without stop lamp lighting.
Definition of stop lamp and conditions for its illumination.
One centre stop lamp.
Stop lamp illumination.
For centre stop lamp.
Stop lamp red.
Does not include stop lamp.
The stop lamp switch in the affected vehicles may malfunction.
Third stop lamp.
The stop lamp in the rear lid illuminates and the lid opens automatically.
This code indicates a malfunction in the stop lamp switch circuit.
The centre stop lamp may be installed outside or inside the vehicle.
See also
High bright LED stop lamp 내장.
A centre stop lamp shall be independent of any other lamp defined in this gtr.
In this driving condition, no stop lamp illumination is necessary.
CHMSL stands for the center high-mounted stop lamp.
An additional center high-mounted stop lamp may be fitted on such vehicles.
The expert from OICA gave a demonstration of different flashing-frequencies of a stop lamp.
An additional centre high-mounted stop lamp may be fitted on such vehicles.
Stop lamp ON In night time tail lamp ON, in all time stop lamp ON.
Figure 1 shows the decrease of the luminous intensity of an S3 stop lamp versus time.
The signal from the stop lamp switch 16 is inputted into a stop lamp status judging unit.
Deceleration by engine braking + 4Hz stop lamp.
The neon center high-mount stop lamp is replaced with a more conventional LED lamp.
When the rearmost… stop lamp.
Stop lamp illumination yes / no.
May be reciprocally incorporated with the stop lamp or non-triangular rear retro-reflector, or with both.
Stop lamp 80 may be the conventional high level stop lamp on present day cars.
Stanley developed the world 's first LED high-mount stop lamp.
A stop lamp category S2 emitting more than the maximum value of category S1 ;.
FIG . 13 illustrates a device that offers the combined function of a position lamp and stop lamp.
Where a stop lamp is fitted to the side-car:.
The 1995 Explorer was the first production vehicle to use a neon center high mount stop lamp.
A rearward facing stop lamp 53 is attached to the rear fender 45.
The display panel ( 10 ) of claim 1, wherein the display panel is a center high mounted stop lamp.
Stop lamp signal 70 derives from a stop process switch placed upon user control panel 34.
Outside North America, the range of acceptable intensity for a stop lamp is 60 to 185 candela.
For a stop lamp " MSY.
A rear fender 25 that covers the rear wheel WR is mounted below the stop lamp unit 24.
A stop lamp (S1) approved in accordance with Regulation No 7 in its original version.
The 1995 Ford Explorer was the first production vehicle to use a neon center high-mount stop lamp.
The stop lamp of category S3 shall flash with a frequency of 4 Hz 1 Hz and, in addition.
For category S3 stop lamp for which they are 10E above and 5E below the horizontal.
You'll also be interested in:
Examples of using Lamp
Show more
The following lamp caps may be selected
A lamp will light up when switch is turned on
W quartz halogen lamp if used without a filter
Examples of using Stop
Show more
They would not stop killing sharks
Next stop menswear and sporting goods
That is not gonna stop me from trying
