Examples of 'stop pin' in a sentence
Meaning of "stop pin"
stop pin - This phrase could refer to a security feature where a user has to enter a predetermined code or PIN to halt a process or transaction
How to use "stop pin" in a sentence
Basic
Advanced
stop pin
Note the door stop pin location.
Lower hanging ball and remove stop pin.
Each bevel stop pin has two positions.
Release the magazine and pull it back to stop pin feeding.
Release the bevel stop pin and allow it to spring outward.
The plate member is prevented from toppling over by a stop pin.
The stop pin is held in position in the gearbox by a rubber element.
The fi rst dowel hole by placing the stop pin at the side.
Move the stop pin by pulling it lightly into the operating position.
The segment gear head also includes a slot adapted to accommodate a stop pin.
The indexing member is a stop pin which preferably is substantially cylindrical in shape.
The endpoint of the slot can also be adjustable using a movable stop pin.
The stop pin is included with the machine and is available as a special accessory.
The rotation disc further comprises a stop pin with a first end attached to the base unit.
Be sure stop pin aligns with slots on the inside of the hanging ball.
See also
N Rotate the shaft until the stop pin slips into position.
The structure comprises a fixed disk, a rotating disk and a stop pin.
Insert the door stop pin into the top hinge in the hole shown.
Notwithstanding the fact that a cylindrical or substantially cylindrical stop pin is illustrated in the FIGS.
N Remove the stop pin from the gearbox.
While holding the spindle with the stop pin 10.
Push the stop pin in completely and rotate it 90 clockwise.
For example, the shapes and sizes of the stop pin mechanisms can vary.
Stop pin 11 engages in a corresponding seat formed on the side of the shoe 3.
To move past 0 to the right, disengage the bevel stop pin.
Stop pin 116 stops the extension of the ottoman linkage at the desired location.
Broken yarn detector lever 6 is restrained from upward movement by a stop pin 9.
The stop pin 8 is located through bores formed in the stop pin retaining inserts 12a.
If the door ( s ) opens too wide, install the door stop pin provided with refrigerator.
Remove the stop pin ( B ) to slide the headstock off the bed.
If necessary adjust the depth stop pin 27.
Cylinder stop pin 30 functions as follows.
To reset the 0 bevel stop, re-engage the bevel stop pin.
The stop pin also prevents rotation of the plunger 118.
The lower part of the upper arm 8 includes an end stop pin 20.
The stop pin 55 is rigidly connected to the second hinged member 34.
Grease plug, hose cover, spanner plug, stop pin plug, dust cap.
The stop pin 116 prevents further extension of the ottoman linkage.
As illustrated in this figure, a first bore hole 37 is intended to receive the stop pin 34.
The stop pin 116 prevents over extension of the ottoman linkage.
The firing pin 25 is jointly connected to the breech-lock by means of a stop pin 27.
A stop pin 86 extends radially outward from the annular abutment flange 85.
It should be noted that the spindle 22 has a stop pin 38 radially projecting therefrom.
Stop pin 11 and pin 9 extend from the same face of the base plate 6.
Said keeper plates ( 14 ) being integrally formed with said stop pin receiving inserts.
The stop pin assemblies 170 each further include an activation switch or activation switch mechanism 174.
Thus, a reverse indexing position is formed by stop pin 30 independent from the functioning of pawl 13.
In the unlatched position, a forwardly oriented surface 53 of the pawl means 50 abuts against a stop pin 55.
Preferably, stop pin 30 is configured as shown in FIG.
Includes a rotation bracket 78 having a slot 80 within which a stop pin 82 is disposed for movement.
