Examples of 'stop the unit' in a sentence
Meaning of "stop the unit"
This phrase is used in various contexts, depending on the specific domain or scenario. It can refer to halting the operation or functioning of a mechanical or electrical unit. For example, 'In case of an emergency, press the red button to stop the unit.'
How to use "stop the unit" in a sentence
Basic
Advanced
stop the unit
Do not operate or stop the unit by inserting.
Stop the unit before the servicing.
Set the time to stop the unit as follows.
Stop the unit if anyone enters the area.
Release the switch trigger to stop the unit.
Operators to stop the unit in case of emergency.
Never use the plug to start and stop the unit.
Know how to stop the unit quickly in an emergency.
Opening the door during operation will stop the unit.
Stop the unit to change direction.
Press again to stop the unit.
Stop the unit and unplug it for maintenance or repair.
If your turn backward the humidistat it will stop the unit.
That will stop the unit from running.
Power failure during operation will stop the unit completely.
See also
Stop the unit and.
During test operation it is impossible to stop the unit with the remote controller.
Know to stop the unit and disengage the controls quickly.
The compressor will stop automatically which will stop the unit from dehumidifying.
Never start or stop the unit with electrical loads connected.
Turn power OFF with the earth leakage breaker to stop the unit in an emergency.
Do not operate or stop the unit by switching on or off the power.
Pressing the red button marked STOP will also stop the unit immediately.
Know how to stop the unit and bleed pressure quickly.
Before performing maintenance, stop the unit and.
Stop the unit and disconnect the mains power supply.
Press the POWER key to stop the unit manually.
Do not start or stop the unit by connecting or disconnecting electrical power.
If there is excessive noise or vibration, stop the unit immediately.
Always stop the unit when operation is delayed or when walking.
If you are approached, stop the unit immediately.
To stop the unit press any of the power buttons at any time.
Press the start / stop button to stop the unit.
Know how to stop the unit and shut off the engine.
If the unit starts to vibrate abnormally, stop the unit immediately.
Learn how to stop the unit and shut off the engine.
If installed on an inclined surface, a safety device may trip and stop the unit.
To stop the unit part way through press and hold this.
Before performing maintenance, stop the unit and unplug the power supply cord.
Stop the unit and disconnect battery pack when not in use.
Before cleaning the unit, be sure to stop the unit and disconnect the power supply.
Stop the unit and disconnect the power source when not in use.
Using the control unit, tilt the bracket to the desired position and stop the unit.
Do not operate or stop the unit by inserting or pulling out the power plug.
On / Off - allows you to use a locking switch to start and stop the unit.
This will also stop the unit accepting any key presses to initiate functions.
Note that activation of the input signal “ Flow switch ” will also stop the unit.
Stop the unit and make sure the blade has stopped before setting the unit down.
Time setting, to stop the unit by timer . Flashing.
Stop the unit and set it to the EE mode.
You'll also be interested in:
Examples of using Unit
Show more
Then position the unit as shown below
Place unit in the fi nal installation location
Any institutional unit may hold valuables
Examples of using Stop
Show more
They would not stop killing sharks
Next stop menswear and sporting goods
That is not gonna stop me from trying
