Examples of 'stop valves' in a sentence
Meaning of "stop valves"
Stop valves are devices used to control or regulate the flow of fluids or gases in a system. They have the ability to completely stop the flow, hence the name 'stop valves', by closing off the passage through which the fluid or gas travels
Show more definitions
- plural of stop valve
How to use "stop valves" in a sentence
Basic
Advanced
stop valves
The stop valves are indicated on every floor.
Connect gauge manifold to ports of stop valves.
The stop valves are factory closed.
Turn the water off at the stop valves.
Open stop valves and check all connections.
Let us focus on these stop valves for now.
Stop valves of metal parts of machines.
Make sure the stop valves.
Stop valves of plastic parts of machines.
High quality shower stop valves.
Close the stop valves of the water circuit.
Connect a charge hose to service ports of all stop valves.
Stop valves parts of machines.
Be sure to fully open the stop valves of outdoor unit.
Not properly aligning tubing into fittings or stop valves.
See also
All stop valves of the water circuit must be completely open.
Check that gas and liquid stop valves are closed.
Stop valves or cocks shall be provided at each of the gauge connections.
Both the gas and liquid stop valves are completely open.
All penetrations in cargo tanks shall be fitted with stop valves.
Make sure that both stop valves are open for vacuuming.
Vacuuming can not be executed completely using the ports on the stop valves.
Make sure to keep both stop valves open during operation.
Reduction of heat energy losses during its transportation through stop valves sealing.
Make sure the stop valves are closed and do not open them.
Open the liquid and gas side stop valves completely.
Check that all stop valves of the water circuit are fully open.
Make sure the liquid and gas stop valves are open.
Be sure that the stop valves are open on both liquid and gas side.
Purely mechanical valves are largely used as stop valves in fluid lines.
Open the stop valves on the exterior unit completely until the stop.
Check that all liquid and gas stop valves are fully open.
Make sure that stop valves both on liquid and on gas side are open.
Shut off the water supply at the stop valves after flushing.
Open the stop valves and add water to the water circuit if needed.
Remove the valve lid and make sure that the stop valves are fully closed.
Close the stop valves ahead and following the sludge and air separator.
Any cut-off valves or stop valves must be removed.
Stop valves of level indicators with magnetic switches for permanent level control always remain opened.
Make sure to reopen both stop valves before restarting the unit.
After completing procedures above, open outdoor unit stop valves stem fully.
Remove service port caps from stop valves on both sides of refrigerant lines.
If the stop valves are left closed and the unit is operated, the compressor and.
Running the system with the stop valves closed may break the compressor.
The stop valves or other shut-off devices of the pipes for loading and unloading.
Your plumbing system usually has a stop valves just before and after the municipal meter.
The stop valves for indoor-outdoor connecting piping are closed at shipment from the factory.
If the vacuum gauge no longer rises, the stop valves can be opened.
And then open the stop valves completely for both the liquid and gas stop valves.
Incomplete cooling / heating function Stop valves are opened.
