Examples of 'strip should' in a sentence
Meaning of "strip should"
strip should - This phrase implies the necessity or requirement to remove or take away something
How to use "strip should" in a sentence
Basic
Advanced
strip should
At both sides a strip should be folded over.
This strip should be left mainly for the development of a suitably designed linear park.
It was everything a comic strip should be.
I think the strip should be dry by now.
One half of a centimeter of the bottom of the material strip should remain exposed.
The wood strip should be thick.
The prospect of a renewed Israeli assault on the Gaza Strip should also not be discounted.
The nail strip should pass the nail stopper.
Norman Kaufman thinks the strip should go on.
Nail strip should be resting on channel in front of push plate.
The horizontal of the concrete strip should be checked using the building level.
This strip should create a diamond shape on top of the larger square swaddling cloth.
If more than one strip is removed the strip should be removed equidistantfrom one another.
The test strip should be used immediately after removing it from the container.
The poor people in the Gaza Strip should be defended.
See also
The colour strip should comprise the same width.
That a safe passage between the West Bank and Gaza Strip should be guaranteed.
The front squeegee strip should lightly touch the fl oor.
The porous strip should not interfere with the production of a detectable signal.
I believe the main character of a comic strip should be one that 's likable.
A colored strip should appear at the bottom of the slide as shown below.
Obviously, the alloy chosen for the ferromagnetic strip should have the highest possible value for.
The orange strip should now be detached from the mother board.
Well, he thinks the strip should go on.
The control strip should not get in touch with the sample.
I hope so . I think the strip should be dry by now.
The term strip should be understood to mean a rolling area having an overall rectangular form.
After approximately 15 minutes, the strip should feel stiff on your skin.
The leading strip should be stronger than the peel strength of the adhesive.
It concludes that the contested strip should be considered as excluded from the SPA.
So, the strip should be definitive and have hard edge lines.
The front side of test strip should face up when inserting test strip.
The membrane strip should have sufficient porosity to allow movement of antibody - or antigen-coated particles.
The U shape of the rim strip should face towards the center of the rim.
The flexible strip should conform to the inside profile of the loop.
Which type of strip should I choose?
The batten strip should be fastened at 300 mm centres with appropriate fasteners.
The Control Panel and Power Strip should never be immersed in water or other.
The paper strip should not rest on the side of the cup ( Figure 6 ).
In diaper use, the novel target strip should be thin to avoid undesirable stiffness.
Thickness of wood strip should match height of front lip on window frame.
During the measurement, the laminated strip should be kept under a 90 ° angle against the film clamps.
The plenum and top strip should be cleaned with stainless steel cleaner.
Plastic strip should do it.
Also, stretching of the strip should be avoided, and friction should be minimized.
Ideally, the dog hole strip should be fairly close to the edge of the bench.
This entails that the laid strip should keep a certain deformability, suppleness and flexibility.
The centre of the strip should be posi - tioned within 30 mm of the angle change.
Again, the length of the strip should be greater than the distance between the junctions 24.
You'll also be interested in:
Examples of using Strip
Show more
At both sides a strip should be folded over
Strip search and body cavity search
Dig or fill in a strip of shoreline or river bed
