Examples of 'stroke length' in a sentence
Meaning of "stroke length"
This phrase is used in the context of sports, specifically swimming or rowing, to refer to the distance covered by one complete stroke or movement. It measures the length or reach of each arm movement in the water
How to use "stroke length" in a sentence
Basic
Advanced
stroke length
Stroke length of needle can be adjustable freely.
Adjust the speed and stroke length.
The stroke length given in the.
This arrangement helps to ensure a consistent stroke length.
Random variation of stroke length relative to maximum length.
Stroke length of yarn guide.
Your personal stroke length statistics.
The stroke length is determined by the cranks on the crankshaft.
As the piston rotates the stroke length varies.
The stroke length can be varied.
Flow regulation can adjust stroke length or motor frequency.
The stroke length is adjusted by means of auxiliary slidable piston.
The scale gives an indication of the current stroke length.
Said maximum stroke length is divided into two segments.
The disadvantage is that tools are required to change the stroke length.
See also
Stroke length variation.
It is very difficult to change the stroke length on these types of machines.
The stroke length can however be varied to the desired amount.
The aim of the ring nut is to adjust the stroke length.
Test stroke length.
The disadvantage is that two hands are required to change the stroke length.
Observe the individual stroke length and the gap between them.
The stroke length of the activating member can therefore be kept small.
The degree of angle controls stroke length and in turn flow rate.
The stroke length may also be shortened to permit changes of compression ratio.
Removal of the spring also facilitates a simple change in the stroke length.
Make sure the stroke length is longer than the width of the product.
Associated with this force bending moment would be proportional to the stroke length.
Pushing the stroke length selection button changes the length of the stroke.
Please do observe the individual stroke length and the gap between them.
The total stroke length of the gas spring is increased by the telescope construction.
The adjustment is performed in that a hydraulic oil limits the stroke length of a cylinder.
The stroke length of the rivet delivery device can also be easily adjusted.
Manual control knobs are readily accessible for adjusting both stroke length and frequency.
The stroke length of a hydraulic linear actuator can be determined based on various factors.
The control scheme is simplified given the only possible variable is the stroke length.
Stroke length and cutting speed can be adjusted as necessary to achieve the desired result.
Thus a reduced cashbox aperture size may be achieved without necessitating a long stroke length.
Your optimal stroke length will depend on these factors,.
This facilitates maximum induced current during the full stroke length of the rotor.
This stroke length can vary in accordance with the width / s of weft tapes being inserted.
A further advantage is that the activating member only requires a very small stroke length.
For example, this can be based on a typical stroke length and / or force of brushing.
The flow characteristic is defined as the relationship between the flow and the stroke length.
In this way the stroke length is selected, compare this with the description above.
We suggest you need to find the right balance between stroke length and stroke rate.
In an embodiment, the stroke length differs depending upon which user actuation interfaz is pressed.
Double pistons also spread out the forces of side loading while also reducing stroke length.
The user inputs the syringe stroke length and syringe stroke volume into system 10.
The term SLA may be determined in accordance with the stroke length.
