Examples of 'subwoofer has' in a sentence
Meaning of "subwoofer has"
subwoofer has - This phrase suggests that the subwoofer, a speaker designed for reproducing low-pitched audio frequencies known as bass, possesses certain features or characteristics. It may refer to capabilities, specifications, issues, or other aspects of the subwoofer
How to use "subwoofer has" in a sentence
Basic
Advanced
subwoofer has
The subwoofer has an internal protection circuit.
Power supply of the subwoofer has turned on.
The subwoofer has been dropped or damaged.
The temperature protection circuit of the subwoofer has been activated due to overheating.
The subwoofer has an integrated amplifier.
The indicator does not indicate that power supply of the subwoofer has turned on.
This subwoofer has plenty to admire.
The PHASE switch of the subwoofer has two settings.
Your subwoofer has been designed to deliver years of stunning audio performance.
The protective circuit of the subwoofer has been activated due to a malfunction.
The subwoofer has an adjustable independent gain control and a PVA treated cone of high rigidity.
The PHaSE switch of the subwoofer has 4 settings.
Once your subwoofer has been set up it is ready for use.
You can switch ON or OFF, when the subwoofer has been selected.
Your new subwoofer has a textured finish in neutral white to blend into any area.
See also
If the display PROTECT ( 7 ) lights up, the protective switch of the subwoofer has triggered.
Note that the subwoofer has been perfectly integrated in the trunk unlike the current generation.
Each satellite speaker has a 3W power output, whilst subwoofer has a 5W.
The adapter cable subwoofer has been plugged in while the Multiroom Receiver was switched on.
You can switch to the S. W, only when the subwoofer has been set to ON.
The position of the subwoofer has to be changed to an off-center position.
The switch ON / OFF ( located on the back ) of the subwoofer has 3 positions.
The microfuse in the subwoofer has blown ( fused ) get a specialist to change the microfuse.
Select a position, between 0 and 180, in which your subwoofer has more output at the listening position.
The subwoofer has been exposed to rain ; or D.
Typically, a good subwoofer has a crossover frequency of about 100hz.
The subwoofer has been set to temporary manual On / Standby switching.
The UMA SB118i subwoofer has been designed to be installed on horizontal surfaces.
The subwoofer has the total output power of 60W.
If the subwoofer has a volume knob, make sure it 's turned up.
If your subwoofer has two low-level input jacks use the right ( mono ) input.
If your subwoofer has a phase control switch, set it to the plus ( + ) sign or 0.
If the subwoofer has a phase control (in addition to the polarization control), set it at "0".
The CSW200 subwoofer has 2 sets of clearly marked input terminals.
You'll also be interested in:
Examples of using Subwoofer
Show more
When using the active subwoofer connected to a
Single subwoofer with high level connection
The volume of the subwoofer is too low
Examples of using Has
Show more
She has the baby with her
The incarceration system has been described as follows
It has signed or ratified the following instruments
