Examples of 'suction pipe' in a sentence
Meaning of "suction pipe"
A suction pipe is a hollow tube or conduit designed to create a vacuum or suction force. It is typically used in various industrial, plumbing, or medical applications to draw fluids, gases, or particles into a container or system. Suction pipes are commonly used in processes such as pumping, drainage, irrigation, and suctioning during medical procedures
How to use "suction pipe" in a sentence
Basic
Advanced
suction pipe
Make sure suction pipe is large enough.
Ensure there are no leaks in the suction pipe.
Leakage in suction pipe or air in the water.
Fibers or dust inside the suction pipe.
Slope suction pipe gradually upward to the.
Bring to same height as suction pipe.
Filter for suction pipe of external detergent.
Ensure there are no air pockets in the suction pipe.
A suction pipe for a vacuum cleaner is disclosed.
Fill pump and suction pipe with water.
Suction pipe always aligns with center of pump.
Especially note the dimension of the suction pipe.
Place suction pipe in the reuse.
Fill pump strainer with water to suction pipe level.
Remove the suction pipe with the floor.
See also
Separate the milk tube from the suction pipe.
Clean suction pipe for about three minutes.
Install a tee in the suction pipe near the pump.
Keep suction pipe free from air pockets.
Attach the nozzles to the suction pipe or handle as required.
Suction pipe is in the water and has no leaks.
The milk tube and suction pipe must be connected.
A suction pipe for a vacuum cleaner.
Vacuuming with accessories attach to handle or suction pipe as required.
The suction pipe described above operates as follows.
Installation is easier if the gas suction pipe is connected up first.
Suction pipe should be as large or larger than discharge pipe.
Pull or press the suction pipe to the required length.
Make sure not to damage the water suction pipe.
Fit the water suction pipe so that it points upwards.
The water level is below the suction pipe inlet.
Seal the suction pipe joints with teflon tape.
Flexible pipe is not recommended on suction pipe inlet pipe.
Clean the suction pipe externally with a damp cloth.
The pump is to be protected by a foot valve on the suction pipe.
The conventional suction pipe support unit is assembled as follows.
Configurations of a suction nozzle and suction pipe are not shown.
Insert the suction pipe into the floor tool adapter.
The detector or a detector is blown from a suction pipe end.
The suction pipe must be kept free from air leaks.
Attach the nozzles to the suction pipe or hand grip as required.
A suction pipe is attachable to an air outlet also formed in the container.
Always use a strainer at the end of the suction pipe or hose.
Submerge suction pipe into a container filled with coating material.
Remove the protective vinyl bag from the suction pipe.
The horizontal section of the suction pipe must also be as short as possible.
Remove large ash volumes by directly immersing the suction pipe.
Lift the suction pipe and dip it into the solvent tank.
Connect the floor tool and the suction pipe together.
Lift again the suction pipe and remove the solvent tank.
You'll also be interested in:
Examples of using Pipe
Show more
Pressure transmission pipe in the combustion chamber
Pipe is the heaviest wave in the world
Two pieces of pipe and a bicycle chain
Examples of using Suction
Show more
Place the suction cup on your windshield
You selected a too high suction power
Powerful suction could cause serious injury
