Examples of 'sulfur levels' in a sentence
Meaning of "sulfur levels"
sulfur levels - The measurement of the amount of sulfur present in a specific substance, such as soil, water, or food. It is often used in environmental and scientific contexts to assess pollution levels or nutritional content
How to use "sulfur levels" in a sentence
Basic
Advanced
sulfur levels
Investigators found that diesel samples contained sulfur levels.
Restoring sulfur levels brought about significant benefit to these patients.
Reduction of sulfur levels.
Efforts to reduce sulfur levels in diesel and gasoline normally require a catalytic process.
Sirens are activated across the island when the sulfur levels increased sharply.
At the same time fuel sulfur levels for off-highway equipment may have a higher level.
These characteristics are maintained even in lubricant compositions containing reduced phosphorus and sulfur levels.
Researchers have found that low sulfur levels lead to a slower joint repair process.
Due to these facts, it is very beneficial to contain low sulfur levels in fuel.
You know, atmospheric sulfur levels are on the rise.
Furthermore, DPFs can function without the need to further reduce fuel sulfur levels.
Most sour crudes have sulfur levels in the range of 1.
All the liquid products were analyzed by GC-AED for gasoline sulfur levels.
Controlled lower content of sulfur levels to promote reliable, consistent welding.
Sulfur levels well below 0.1 mass ppm may be achieved thereby.
See also
Results show pigs fed DDGS did not have elevated sulfur levels in their organs.
Historically, in Europe lower sulfur levels than in the United States were legally required.
Yeah, this is more artichoke . You know, atmospheric sulfur levels are on the rise.
Extremely high sulfur levels result in " hard rubber " or ebonite.
Environmental regulations mandate the lowering of sulfur levels in motor gasoline ( mogas ).
Again, however, product sulfur levels are not greatly reduced.
You are Martin Bishop, EPA inspector, checking on sulfur levels in the fuel load.
After conventional HDS treatment sulfur levels are usually in the range of about 500 ppm.
Either antimony or germanium intermetallics are preferred at sulfur levels above about 500 ppm S.
However, these hindered dibenzothiophenes predominate at low sulfur levels such as 50 to 100 ppm.
It is preferred to use tin intermetallics at the lower sulfur levels ( below about 500 ppm S ).
You'll also be interested in:
Examples of using Levels
Show more
More levels may be appropriate in this dimension
Working at multiple levels has other advantages
Levels of awareness were tested by an independent research institute
Examples of using Sulfur
Show more
There are several sulfur springs in the area
Sulfur hexafluoride gas is denser than air
They say there are sulfur springs nearby
