Examples of 'sum signal' in a sentence
Meaning of "sum signal"
Refers to a type of signal or transmission that represents the combined or total of multiple individual signals or components. It is often used in the context of electronic or digital systems where individual signals are summed or combined to form a composite signal
How to use "sum signal" in a sentence
Basic
Advanced
sum signal
Additional amplifiers for the sum signal.
The sum signal comprises a reduced number of channels.
The internal summing amplifier generates a sum signal from.
The sum signal plus the side information is transmitted to the decoder.
Several methods of generating this sum signal have been suggested previously.
This process is accomplished by detecting the amplitude of the sum signal.
The sum signal can be received with a single antenna at the terminal.
Stereophonic sum signal.
This sum signal is nothing more than the response signal of the transponders.
Each photocell is connected to a first and second sum signal output line.
The resulting sum signal is then recorded on a magnetic recording medium using helical scan techniques.
This leads to a frequency selective time delay of the bandwidth extended sum signal.
Level indicators for the sum signal at the XLR output.
These different cues are either implicitly synthesized by applying a mixer to the received sum signal.
Decorrelation of the sum signal to obtain a decorrelated signal ;.
See also
Switch in upper position The power amplifier amplifies the stereo sum signal.
Dematrixing of the sum signal so as to obtain a set of principal sources ;.
The input signals can be added to a stereo sum signal and two send ways.
A sum signal is formed by adding the two pulses thus processed ;.
Use the fader MAIN MIX to adjust the definite volume of the sum signal.
Module for dematrixing the sum signal so as to obtain a set of principal sources ;.
Level control FX TO MASTER to add the effect signal to the sum signal.
Dematrixing the sum signal to obtain a set of the principal sources ; and.
Wireless simulator operation via receiver 's sum signal.
Optionally, the sum signal is coded using a conventional mono audio coder.
The line output signal is equivalent to the sum signal of the built-in mixer.
First, the sum signal is copied to the left and right output signals.
FIG . 2 shows a number of sources transmitted as sum signal plus side information.
The resulting sum signal is supplied as a wobble address signal stream to the selector 73.
The decoder therefore receives, in parallel with the binary stream, the sum signal S s.
Then, the sum signal is copied to left and right output signal paths.
A circuit SID sums these reciprocals, with the sum signal being referenced S / w.
The resulting sum signal is used for exciting the perceptual weighting synthesis filter 31.
Use the control FX 1 TO MAIN to adjust the effect intensity for the sum signal.
In addition, an angle between the sum signal and the difference signal vectors is present.
The sum signal corresponds with the antenna beam along center-line of the antenna.
The spatial coherence between the sum signal and the multi-channel signal is thus complied with.
Use as an output, The USB jack sends the MAIN MIX sum signal.
Typically, the sum signal comprises two channels and is compatible with conventional stereo broadcasting.
Figure 12 shows an interpretation of two signals from a received sum signal.
The transmitted sum signal corresponds to a mono down-mix of the stereo or multi-channel signal.
Effect level control to add the effect signal to the sum signal 24.
A single transmitted sum signal corresponds to a mono downmix of the original stereo or multi-channel signal.
When the signal arrives from the direction of the boresight, the sum signal is 2VCos ( wt ).
The stereo sum signal post-fader.
Graphical 7-band equalizer for the MAIN MIX sum signal.
The obtained sum signal 39 is supplied further to radio-frequency parts.
LED level indicators, to indicate - the sum signal adjusted with the control.
The sum signal adjusted with the control MASTER 25.
The internal summing amplifier generates a sum signal from channels 1 and 2 to control channel 5.
You'll also be interested in:
Examples of using Signal
Show more
Give me a signal when you want me to start
You have to use one signal at a time
Signal strength indicating connection between units
Examples of using Sum
Show more
The purchase sum was to be paid in three instalments
Private cofinancing is the sum of the two
This sum of money is all for you
