Examples of 'superficial velocity' in a sentence
Meaning of "superficial velocity"
superficial velocity - In fluid dynamics, this term refers to the velocity of a fluid at a specific point on the surface, often used in the context of analyzing flow characteristics
How to use "superficial velocity" in a sentence
Basic
Advanced
superficial velocity
Entrainment is an exponential function of superficial velocity.
The superficial velocity is the velocity of the mixture of gases.
This flow rate is customarily referred to as the superficial velocity of the fluidization gas.
The mean superficial velocity of the gas may be substantially constant.
In an alternative embodiment, the average gas superficial velocity is maintained above a minimum level.
The idling superficial velocity is less than the operating superficial velocity.
Furthermore, bed instability or bed compression will result from too high a superficial velocity.
The high superficial velocity in the reactor is obtained by a high recirculation of the effluent.
The maximum pressure the ion exchanger itself is capable of resisting, limits the superficial velocity.
The superficial velocity will vary depending on the geometry of the reactor or reactors employed.
The process can also be operated according to a desired gas superficial velocity ( GSV ).
To determine this, the superficial velocity was calculated, as can be seen below.
The mock-up was supplied with water at a superficial velocity of 2 cm / s.
Thus, approximately the same superficial velocity will be maintained and pressure losses are minimized.
EXAMPLE 3 This example scales the process of Example 1 using superficial velocity and space-time reaction intensity.
See also
Desirably, the gas superficial velocity is greater than 2 m / s at any point in the reactor.
The contacting step is performed at a gas superficial velocity of at least 1.0 meters per second.
The average superficial velocity of the anode solution is preferably from 1 to 30 cm / sec.
The mock-up was supplied with water at a superficial velocity equivalent to 1.5 cm / s.
Ugs denotes the superficial velocity ( flow rate of fluid / cross section of the honeycomb catalyst ).
Heterogeneous flow does not occur at a superficial velocity less than 0.03 m / sec.
Ui, superficial velocity in phase i ;.
Homogeneous flow does not occur at a superficial velocity greater than 0.05 m / sec.
The lower limit superficial velocity is approximately 0.1 ft / sec.
This means that the column can resist a superficial velocity of at least 4500 cm / h.
And at a superficial velocity of 5 m / s.
Even more desirably, the gas superficial velocity is greater than about 4 m / s.
This translates to a superficial velocity of 7-10 cm / sec in the acid and base loops.
Yet more desirably, the gas superficial velocity is at least about 3.0 m / s.
In the reactor, the superficial velocity of the liquid phase is preferably greater than 0.1 m / second.
Most desirably, the gas superficial velocity is greater than about 8 m / s.
More preferably, the average gas superficial velocity is between a range of 2 m / s to 6 m / s.
You'll also be interested in:
Examples of using Velocity
Show more
Wingsuits reduce the velocity of their fall
Velocity measuring unit screws stainless steel
Increased flow velocity in his cerebral arteries
Examples of using Superficial
Show more
Superficial inguinal lymph node retained or removed
A very slight superficial defect limit allowed
Superficial cuts and bruises to the face
