Examples of 'supply rail' in a sentence
Meaning of "supply rail"
supply rail: Refers to the electrical connection that supplies power to electronic components in a circuit board or device. Used in the context of electronics and engineering
How to use "supply rail" in a sentence
Basic
Advanced
supply rail
It was intended to prevent the supply rail from potential invaders.
It is sufficient to add a memory and a different logic onto the associated supply rail.
The current supply rail passes through this cavity.
Set of connecting accessories for an electrical supply rail with an asymmetrical profile.
The fuel supply rail includes a first fuel supply rail and a second fuel supply rail.
Desired supply rail.
The substrate is connected to reference supply rail GND.
CRRC wins bidding to supply rail transit equipment to Costa Rica.
The drain of transistor SF is connected to supply rail Vdd.
Between pulses, the supply rail voltage rises again.
Photodiode D then permanently discharges towards the supply rail.
The assembling workability of the fuel supply rail is enhanced, accordingly.
Second diode reverse-connected between the second intermediary rail and the second supply rail.
Assembling and attaching work of the fuel supply rail thus can be easily done.
The supply rail is, as for itself, untouched.
See also
However, another form of pressing branch or of current supply rail is conceivable.
Only the positive + VDD supply rail is used to drive the motor.
The drain of the first read transistor M 2 is connected to supply rail Vdd.
Instead of cabling, for example a power supply rail and wireless data communications can be used.
This supply rail is known as a “ third rail ” in the railway industry.
As charge is drawn from the capacitor 60, the supply rail voltage drops.
When the supply rail voltage rises again, the gate 64 reverts to its conducting state.
The point of contact between rubbing member 85 and power supply rail 50 is essentially a point contact.
The positive supply rail across the capacitor 15 will then be put across the transformer winding 12.
In the embodiment depicted, the pressing branch 4 hugs the shape of the current supply rail 10.
The drain of the transistor 66 is connected to a voltage supply rail through a 4.7 kohm biassing resistor 70.
The long base of the opening 18 therefore presses against the current supply rail 10.
A diode 5 is forward connected between pad 3 and a high power supply rail V DD.
A diode 7 is reverse-connected between pad 3 and a low power supply rail V SS.
Region 41 e is connected to positive power supply rail 5.
A first triac 23 is connected between pad 3 and high supply rail 5.
A second triac 25 is connected between pad 3 and low supply rail 7.
The vehicle has a rear rubbing member 85 in contact with power supply rail 50.
Rail 7 ′ is in a low state, that is, substantially a voltage V SS of low supply rail 7.
The drains of the transistors N1 and N2 are connected to a positive supply rail 10.
You'll also be interested in:
Examples of using Supply
Show more
An extra air supply opening is definitely required if
Type designation of the power supply unit
Disconnect electrical supply if further adjustments are needed
Examples of using Rail
Show more
Accidents during the rail traffic performance
Rail equipment maintenance with smart phone
Canvass of the rail yard got us nothing
