Examples of 'surface of the cap' in a sentence
Meaning of "surface of the cap"
Surface of the cap: This phrase refers to the outermost part of a cap or hat. It describes the top or visible layer of the headwear. For example, 'The logo is embroidered on the surface of the cap, giving it a sleek and professional look.'
How to use "surface of the cap" in a sentence
Basic
Advanced
surface of the cap
The surface of the cap could possess cutting and support teeth.
The second detection portions is a protrusion that protrudes outwardly from a side surface of the cap.
As such means that the surface of the cap layer was not texturized.
Advantageously, the covering means may be flush with an outer surface of the cap.
The opposed surface of the cap can be formed within the recess of the cap.
This is done by first placing a peel-away sleeve on the base surface of the cap.
The reflective internal surface of the cap is tapered towards the outlet of the conduit.
Additionally, there are cystidia present on both the surface of the cap and the stem.
The surface of the cap is usually dry to moist, and radially fibrillose.
Arrow-shaped grooves on the surface of the tabs and on the surface of the cap.
The surface of the cap is dry, with wrinkles and pits at maturity.
Optionally, the manually deformable part comprises a majority of the upper surface of the cap.
The outer surface of the cap 1 is smooth and may be precision ground.
The silicone membrane 16 forms a completely contiguous operating surface on the outer surface of the cap.
An inner surface of the cap ( a surface within the housing ) closes the outlet opening.
See also
A seal includes a continuous, first axial region extending outwardly from the inner surface of the cap.
The exterior surface of the cap 56 may have an aerodynamic shape to reduce aerodynamic drag.
A cylindrical projection 51 is provided in a center part of one main surface of the cap 50.
The outer surface of the cap is also provided with a collar 70 for better manual gripping.
Edge 30 defines an indentation or shoulder on the upper surface of the cap 14.
The inner surface of the cap 12 is preferably smooth.
A recess 68 of a certain depth is defined on a lower surface of the cap member 56.
The surface of the cap is dry, smooth, and has a velvety texture.
Reference number 5 indicates a surface of the cap body between the grooves 4.
The lever 107 is formed by a cut-out in the upper surface of the cap.
The outer surface of the cap is provided with ribs 66 and a collar 70 for better gripping.
Extending outwardly from the inner surface of the cap 50 is a conical plug 54.
The inside surface of the cap 60 includes an annular ring of internal teeth 72.
A drive member ( not shown ) extends from an inner surface of the cap 12.
The peripheral surface of the cap 32 is shown with a knurled edge 76.
A valve washer 37 is disposed in a contact with the lower surface of the cap washer 36.
In some instances, a proximal surface of the cap connector 1630 is substantially planar.
The end of the element 24 lies flush with the lateral surface of the cap 13.
The lower surface of the cap has an outlet orifice 30 surrounded by an annular wall 31.
The cap 28 preferably has gauge notches 29 arranged circumferentially on the outer surface of the cap 28.
Instead of the wings 58, the outer surface of the cap is provided with a knurled region 64.
Aligned curvilinear deflecting surface 280 is formed in the facing surface of the cap portion 252.
The removed wedge safety ring 36 falls into the bottom surface of the cap 60c.
As previously described, the outer rotor 43G is positioned on the outside surface of the cap 30G.
The fingers 68E extend from the inner disk 36E toward the inner surface of the cap member 30E.
The fingers 68H extend from the inner disk 36H toward the inner surface of the cap member 30H.
You'll also be interested in:
Examples of using Cap
Show more
Retighten the cap to the filter housing
Cap and back panel sheet steel
Do not install cap onto water bottle
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
