Examples of 'surface of the layer' in a sentence
Meaning of "surface of the layer"
Surface of the layer: This phrase is used to describe the outermost part of a material, substance, or structure. It signifies the uppermost or exterior surface of a layer
How to use "surface of the layer" in a sentence
Basic
Advanced
surface of the layer
Hence it only reaches the surface of the layer of paint.
The rough surface of the layer becomes smooth after laser irradiation.
It may consist of a metallisation of the top surface of the layer.
The exposed surface of the layer 44 is light absorbent and is therefore nonreflective.
The exterior surface may be a surface of the layer of glass.
Further, pealed surface of the layer has small changes for example surface roughness in its.
Solvents may evaporate from the surface of the layer.
For example, the inner surface of the layer of elastomer is preferably concave.
Is made difficult through the presence on the surface of the layer of alumina.
Disposed on an outer surface of the layer 92 may be a layer 95 of a superabsorbent coating material.
This implantation takes place over the entire surface of the layer.
The upper surface of the layer 6 has uniformly distributed pyramid-like studs 7.
The surface barrier is disposed on a surface of the layer of repair fabric.
The surface of the layer 7 b is then polished ( step S 8 ) to give it a mirror appearance.
The incision may be formed in the rear surface of the layer of artificial grass.
See also
The outer surface of the layer 10A forms part of the exterior of the aircraft.
There then arises a problem of the state of the surface of the layer of bonder.
The other surface of the layer 21 carries a pressure sensitive adhesive 22 covered by a release paper 23.
Preferably hooks are molded integrally with an exposed surface of the layer of thermoplastic material.
In another preferred embodiment the wave form varies over the surface of the layer.
The electrode 7 is located at the surface of the layer 3 and covers an N - doped zone.
E = angle of a ray issuing from the focus with the exit surface of the layer.
Forming a layer of the resin on a surface of the layer of fibres ; and.
The additional heat-sealable layer ( 6 ) also comprises particulate material ( 7 ) immediately below the surface of the layer.
The adhesive is placed over the exposed surface of the layer 40 in the second mold.
R = angle of the ray refracted in air with exit surface of the layer.
Conducting layer 36 is formed on a lower surface of the layer of dielectric material 35.
Such step increases the hydrophilicity of the upper surface of the layer 8.
It is oriented perpendicularly to the surface of the layer ( see FIGS . 1a and 1b ).
The ends of the nanowires are then flush with the surface of the layer 6.
The barrier layer may cover the entire first surface of the layer of repair fabric.
An encapsulation layer 3 is deposited on the surface of the layer 1.
Preferably, hook elements are integrally molded on a surface of the layer of thermoplastic material.
The bottom of the etched zones is approximately equivalent to the surface of the layer 101.
An elongated conducting band 31 formed on an upper surface of the layer of dielectric material 35 ;.
This layer ( C ) is preferably in direct contact with the outer surface of the layer ( A ).
Preferably, the barrier layer covers the entire first surface of the layer of repair fabric.
The electro-catalytic layer ( white ) remains almost entirely localised at a surface of the layer of TiOx.
A groove 5a can be seen on the free surface of the layer 5.
Mixture B ( mass of 200 g ) is then introduced into the die at the surface of the layer A.
Diffraction grating RZ is provided on the surface of the layer D 1.
The implantation takes place from the free surface of the layer of oxide 202.
At this juncture, each object OB 6 rests on the upper surface of the layer C 5.
An encapsulation layer 13 is deposited onto the surface of the layer 11.
A third layer 22 is disposed facing the lower surface of the layer 21.
The mask 19 is substantially parallel with the surface of the layer 18.
Generally crucial point is that the upper surface of the layer ( 36 ) is planar.
The printing plates 26 are mounted on the outer peripheral surface of the layer 92.
At angles of greater than about 15 °, total reflection at the surface of the layer 35 occurs.
You'll also be interested in:
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
Examples of using Layer
Show more
A layer is displayed independently from other layers
The usage of second layer additional purchase
Every layer seems to beat to a different tune
