Examples of 'surface of the metal' in a sentence
Meaning of "surface of the metal"
The term 'surface of the metal' refers to the outermost layer or coating on a piece of metal. It often relates to the physical properties, such as texture, finish, or protective layer, that can be observed or measured on the surface of the metal
How to use "surface of the metal" in a sentence
Basic
Advanced
surface of the metal
The surface of the metal electrodes is hydrophilic.
This heats up the surface of the metal.
The surface of the metal is left almost.
It takes place on the surface of the metal.
Inner surface of the metal door after plating leatherette.
The surface is an oxidized surface of the metal.
Of the surface of the metal.
They appear as seams across the surface of the metal.
The first surface of the metal layer can be exposed.
The assembly is placed on a surface of the metal device.
The shiny surface of the metal helps creating a perfect illusion.
Electrically insulate the surface of the metal handles.
The surface of the metal was pitted from acid rain.
All corrosive attack begins on the surface of the metal.
Treating the external surface of the metal substrate by a functionalization treatment.
See also
A dry powder is used to cover the surface of the metal.
The external surface of the metal ring is preferably sandblasted prior to bonding.
Restricting anodic or cathodic reactions on the surface of the metal.
The outer surface of the metal layer may include generally tubular protrusions.
The treatment solution is applied to the surface of the metal substrate.
The surface of the metal is smooth which enhances the removability of the stuck dusts.
The siloxane oligomer was coated onto the surface of the metal fluoride.
The outer surface of the metal layer is treated for changing its outer appearance.
Was attached vía an alligator clip to the external surface of the metal syringe needle.
If the original surface of the metal is no longer recognizable ; or.
Very strongly reducing materials can act at the surface of the metal to degrade it.
The outer surface of the metal layer 4 is treated completely.
Dry the scooter and protect the surface of the metal with wax.
In general, the surface of the metal substrate is covered with an oxide.
Thereafter a transparent outermost layer is provided on the outer surface of the metal layer.
In simple terms, the surface of the metal is beginning to corrode.
It is a process that introduces nitrogen and carbon into the surface of the metal.
These subsequently fall onto the surface of the metal where they solidify.
Both effects may result in a loss of quality of the finished surface of the metal.
Cleaning the top surface of the metal backing plate ;.
Empirical evidence suggests that the reaction takes place on the surface of the metal.
Oxidation of the surface of the metal to form a passivating film of metallic oxides ;.
Normally there are two different color finish for the surface of the metal slider.
Cleaning the surface of the metal substrate with an alkaline cleaning composition ;.
The through hole is communicatively coupled to the outer side surface of the metal member.
As light is incident upon the surface of the metal film, it excites surface plasmons.
The embedded tear straps include fibers embedded beneath a surface of the metal skin.
A surface of the metal support is made slip-resistant by the following successive operations,.
Most magnafluxing procedures use iron oxide to coat the surface of the metal being tested.
This protects the surface of the metal from stains, rust and corrosion.
The block copolymer provides anticorrosion and lubricating properties to the surface of the metal.
Treating of the surface of the metal layer may comprise texturing, for example.
The silane or phosphorus functional compound interacts with the surface of the metal pigment.
This may require the surface of the metal to be cleaned in a pre-treatment step.
The alkoxysilane was hydrolysed and then coated onto the surface of the metal fluoride.
You'll also be interested in:
Examples of using Metal
Show more
But there is metal in the electrolyte regulators
It sounds like a wheelchair going down a metal staircase
Plastic or metal foil vent is not recommended
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
