Examples of 'surface of the plate' in a sentence
Meaning of "surface of the plate"
This phrase describes the top or exterior area of a plate, usually referring to the part where food is placed or presented. It pertains to the visible and accessible portion that is in direct contact with the food
How to use "surface of the plate" in a sentence
Basic
Advanced
surface of the plate
The surface of the plate was bright silver.
The temperature of the exterior surface of the plate.
The sensitive surface of the plate is then ready to be exposed.
All are chamfered at the upper surface of the plate.
To the outer surface of the plate a heating element is applied.
The chip is glued on the upper surface of the plate.
The rubbing surface of the plate was oiled before the test.
The angle of incidence of the light on the surface of the plate.
The surface of the plate can be coplanar with the support.
In this way the use of the surface of the plate is optimised.
A bumper is mounted as to form cavities on a heat radiating surface of the plate.
The acid bites into the surface of the plate where it was exposed.
Normal and tangential stresses are produced on the surface of the plate.
This will keep the surface of the plate clean and bright.
An additional annular cavity is provided in the bottom surface of the plate.
See also
Preferably a lower surface of the plate is provided with water draining grooves.
This deposits stranded areas of charge onto the surface of the plate.
The bottom surface of the plate body is formed with opening troughs.
Abrasion is caused by the flowing stone material on the surface of the plate.
The end surface of the plate material is cut by means of the cutter.
Each station comprises an emitter mounted on the lower surface of the plate.
The surface of the plate is usually roughened with a regular pattern or grid.
The tab is parallel relatively to the surface of the plate and protrudes.
The surface of the plate is cooled by passage under the plate of a cryogenic liquid.
A stem portion extends downwardly from a lower surface of the plate section.
The outer surface of the plate is painted and covered with a protective film.
The inhibition halo covers almost the whole surface of the plate.
The surface of the plate is wiped off with a moist gauze to remove water.
The lesser trochanter of each bone touched the surface of the plate.
The bottom surface of the plate body is formed with a rectangular opening trough.
A switch input section is mounted on the upper surface of the plate member.
This cleans the surface of the plate and removes the organic impurities from it.
One or more valves may be attached to the rear surface of the plate.
The top surface of the plate is washed with PBS to remove excess cell suspension.
Excess resin was removed from the surface of the plate using a paper towel.
Homogeneous spatial distribution of the flows of secondary fluids over the surface of the plate.
The growth was then removed and the surface of the plate sterilised with chloroform.
It often looks like mucus or a cloudy film over the whole surface of the plate.
The surface of the plate includes abrasive means ;.
For example to remove the remaining steel from the surface of the plate.
Thus, the bottom surface of the plate is essentially continuous.
The return integrally connects the flange and main surface of the plate.
The printing surface of the plate was smooth and tack-free.
This implant has two elevated ridges on the upper surface of the plate.
The medium was discarded ; the surface of the plate was dried up by paper wool.
The leg may have an extension which is inserted into a bottom surface of the plate.
A surface of the plate 34 is subjected to surface treatment by use of the tetrafluoroethylene resin.
The inoculum was evenly spread across the surface of the plate with a sterile loop.
The tactile surface of the plate 7 can also be used to constitute a programmable touch keyboard.
The openings lead out into parallel grooves machined on the lower surface of the plate.
You'll also be interested in:
Examples of using Plate
Show more
Put the upper plate on the stove
Face plate in position for shredding paper
Do not submerge hot plate or burners in water
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
