Examples of 'surface of the tube' in a sentence
Meaning of "surface of the tube"
The surface of the tube refers to the outer layer or exterior of a cylindrical object, such as a pipe or hollow cylinder. It can also refer to the outer layer of a tube-like structure, such as a blood vessel or a plant stem
How to use "surface of the tube" in a sentence
Basic
Advanced
surface of the tube
The outside surface of the tube.
A constant heat flux is considered at the surface of the tube.
The inside surface of the tube is generally cylindrical and of circular section.
The electrodes are provided on an outer surface of the tube.
On the exterior surface of the tube may be a scale consisting of three gradations.
To be in contact with the entire inner surface of the tube.
The inner surface of the tube to be coated can be either treated or untreated.
Material can be attached to the surface of the tube by stitching over it.
It is also advisable to perform mechanical polishing on the inside surface of the tube.
The outside surface of the tube is densely hairy while the inside is glabrous.
These sectors may extend from an inner surface of the tube.
Instead the surface of the tube surrounding the hole has a tendency to become deformed.
The hydrophobic coating is provided on the internal surface of the tube.
The outer surface of the tube may have more than one annular groove.
The slit has no sharp projection on the outer surface of the tube.
Preferably, the inside surface of the tube is also subjected to mechanical polishing.
This seal comes into contact with the surface of the tube.
Further, the inner surface of the tube is poor in the slip properties.
Such a roller will coat small imperfections in the surface of the tube.
Thus, an outer circumference surface of the tube completely contacts the fin.
An outer diameter of the tube may correspond to an outer surface of the tube.
The outer surface of the tube 13 is preferably coated with an electrically insulative material.
A different distribution of the holes on the surface of the tube can be provided.
The outer surface of the tube will ideally be smooth and seam-free.
It is known from this document to roughing a surface of the tube before brazing it.
The rear surface of the tube is designated as 39.
A crimping tool may then be applied forcefully to the outer surface of the tube.
The teeth may dig into the outer surface of the tube by a certain extent.
The thickness required for having an effective coating depends on the surface of the tube.
Apunch then strikes the exterior surface of the tube to cut the hole.
The secondary tensioning rollers maintain a tensioning bias against the inner surface of the tube.
Method and device for unclogging the top surface of the tube plate of a steam generator.
At this point, crystals of bisphenol-A will crystallize out on the surface of the tube.
Alternatively, the inner surface of the tube may be coated to provide a textured coating.
Thereby the heat from them is distributed allover the surface of the tube.
The pulse will echo off the hard surface of the tube inner wall to provide E1.
The steam condenses and flows downwards on the outer surface of the tube.
The outer surface of the tube 30 may be smooth.
The barrier coating is deposited on the internal surface of the tube to a desired thickness.
The outer surface of the tube 60 had been polished to a satin finish.
The sleeve has an inner surface facing the outer surface of the tube.
The surface of the tube 202 is preferably first coated with an adhesive.
Brass ball for conducting away electrical energy from the surface of the tube.
If touching the skin, the outside surface of the tube may have a soft finish.
The steam will condense and flow downwards on the outer surface of the tube.
The outer surface of the tube may also be ' frosted ' by micro-roughening.
The filler metal fuses with the interior surface of the tube to produce a clad weld.
Alternatively, a threaded, erosion-resistant sleeve may be screwed onto the outer surface of the tube.
The flux for any cross-sectional surface of the tube will be the same.
Preferably, the elastic wall is in adjacent contact with the internal surface of the tube.
You'll also be interested in:
Examples of using Tube
Show more
The telescopic tube must be tightly locked
Tube him while you have an airway
Replace with a new tube connecting piece
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
