Examples of 'surface passivation' in a sentence
Meaning of "surface passivation"
Surface passivation is a technique used in semiconductor device fabrication to improve the performance by reducing surface recombination. It involves adding a thin layer of insulating material to the surface to minimize the presence of defects that can trap charge carriers
How to use "surface passivation" in a sentence
Basic
Advanced
surface passivation
Surface passivation of black silicon phosphorus emitters.
Depositing an antireflective layer on the surface passivation layer.
Surface passivation thus takes place in part before any contact with air.
It is then preferable for the surface passivation layer to be silicon.
Surface passivation augments surface protection when handling is required between production stages.
This degrades the quality of rear surface passivation and lowers the cell performance.
Reactor surface passivation with an aluminum alkyl minimizes the formation of fines layers.
The same patent also displays some methods that allow PCR microreactor surface passivation.
The surface passivation becomes a key step for its integration in attractive optoelectronic devices.
Finally, a transistor surface passivation study will be led.
Surface passivation techniques and geometry optimization for a lithium drifted silicon detector array.
The deposition may optionally be preceded by a surface passivation treatment of substrates 1 or 2.
Therefore, surface passivation treatments or coatings are often applied.
It thus plays the part of a tunnel oxide by ensuring a surface passivation of the substrate 1.
Back surface passivation is also important, specially to increase the infrared response.
See also
A simple one-step diffusion is useful where there is no surface passivation of the device.
Surface passivation with SilcoNert of all metallic, wetted components for preventing particle adsorption.
Right after the deposition, the surface passivation quality of the oxide is very poor.
However, other variations, such as spiking at lower temperatures also result in metal surface passivation.
Moreover, the electrolyte ( concentrated potassium hydroxide ) involves surface passivation through blocking electrochemical mechanisms.
Surface passivation of germanium with atomic layer deposited Al2O3.
This antireflective layer 5 extends over the entire surface of the surface passivation layer 4.
The surface passivation layer 4 is covered with an antireflective layer 5.
Similarly, attempts to leach chalcopyrite with bacteria are hindered by the same surface passivation phenomenon.
This surface passivation layer 4 can be, for example, an intrinsic amorphous silicon layer.
High open-circuit voltages and high cell efficiencies due to the excellent surface passivation of a-Si.
An inorganic surface passivation treatment is available as part of the corrosion-prevention treatment at stage 24.
Listen: The advantage of using black silicon is that it ensures an effective surface passivation.
Even if surface passivation with EtOH were considered ( discussed below ), the large error seems irrecoverable.
Thermal annealing can, to some extent, improve the surface passivation quality of APCVD oxide.
Depositing the surface passivation 80 onto the surfaces of the structure other than the metal contacts 70, 75.
Key words, ellipsometry, porous silicon, protein adsorption, surface passivation.
Reference 304 denotes the surface passivation and protection layer.
The semiconductor substrate 1 comprises, on another surface 2, opposite the surface 3, a surface passivation layer 4.
An antireflective layer 5 is provided on top of this surface passivation layer 4 ( shown in FIG . 1 ).
You'll also be interested in:
Examples of using Passivation
Show more
Suitable for passivation of stainless steel instruments
The key to resolving the paradox is passivation
Chromfree passivation for aluminum and magnesium
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
