Examples of 'surface side' in a sentence
Meaning of "surface side"
This phrase is commonly used in military or naval contexts to refer to activities, operations, or events that occur on or near the surface of the ground or water. It distinguishes actions happening above the surface from those underground or underwater. For example, 'The submarine is equipped with advanced technology for both underwater and surface side operations.'
How to use "surface side" in a sentence
Basic
Advanced
surface side
The sheet is set on the concave surface side.
There can be attained a surface side cover excelling in initial translucency.
The impact shall occur on the reflecting surface side.
There can be attained a surface side cover for a solar cell module.
The impact must occur on the reflecting surface side.
There can be attained a surface side cover excelling in flexibility for a solar cell module.
Placing the first protection device on the first surface side.
On the rear surface side.
A groove filled with a passivation glass is present on the upper surface side.
Install the small side to the surface side without arrow.
Number of Reinforcement Directions The reinforcementmesh canbedefinedwith twoor three reinforcement directions for each surface side.
Check for burrs on the concrete surface side and twisting.
There can be attained a surface side cover excelling in heat resistance for a solar cell module.
The gear housing has an opening portion on the bottom surface side.
Place the abrasive bearing preform cutting surface side up on a horizontal work surface.
See also
In another embodiment the condensed liquid is transported toward a condensing surface side edge.
Solar cell module having a specific surface side cover excelling in moisture resistance and transparency.
The first appliqué is disposed entirely on the inner surface side of the window.
Then, the front surface side is evacuated.
The air from the blower for exhaust is ejected to the front surface side.
You can specify the parameters for each surface side separately in the two dialog tabs.
A surface side sheet allowing the permeation of the body fluids ;.
Nanostructures present a good surface morphology with smooth crystallographic surface side walls and a good dimensional homogeneity.
On the top surface side of the tip of the tooth 5 is formed a chamfered section 5a.
This sensor is formed on the front surface side of the component, in substrate 1.
Then, the liquid flows out from the same one surface side.
A first metallization on the rear surface side corresponding to a first main electrode ;.
Fig . 2 is a perspective view of the hybrid vehicle seen from the other lateral surface side.
This structure is arranged on the lower surface side of thinned semiconductor substrate 74.
Leak-proof gathers disposed upright along both edges in a transverse direction of said surface side sheet.
Silicon substrate having an upper surface side and a plurality of layers of alternating conductivity type ;.
As a result, the fibril structures in the outer surface side also turn thick.
Thus, the outer surface side undergoes a more intense thermal hysteresis than the inner surface side.
A third region formed on the upper surface side in the second well ;.
FIG . 5 shows a view of the needle selection actuator as viewed from the attraction surface side.
Liquid crystal layer arranged on the rear surface side of the diffuser ; and.
The upper surface side 3 and lower surface side 4 can be picked out.
Thus, all voltage withstand areas are gathered on the upper surface side of the component.
Fig . 4 illustrates the rear surface side of the inner cover with each led omitted.
A strip of the second conductivity type formed on the upper surface side of the substrate ;.
In this case, EVA used as the surface side filler is prevented from being colored.
X-ray diffraction scans of the free surface side Fig.
Reference character C denotes the skin surface side of a wearer, and D denotes the outer surface side.
Label 93 indicates a mat layer provided at the surface side.
An absorbent body interposedbetween said surface side sheet and said back face side sheet ;.
Hole expansion was performed by using a conical punch of 60 ° from a shear surface side.
Moreover, the exterior surface side the lower side in FIG.
A thermosetting resin layer 13 is deposited on the rear surface side of chip 1.
On the inner surface side of the cover body 20, there is mounted an index card.
Next, a pressing part is operated and one outer surface side of the tire is pressed.
You'll also be interested in:
Examples of using Side
Show more
Neither side fully respected the agreement
Attach foot with right side pin
Sit on the side of your bed or in a chair
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
