Examples of 'surface speed' in a sentence
Meaning of "surface speed"
surface speed: the velocity or rate of movement on the exterior of an object or body of water
How to use "surface speed" in a sentence
Basic
Advanced
surface speed
Variables associated with constant surface speed.
The desired surface speed can not be attained.
They had a stronger displacement and a better surface speed.
Used in reference to the surface speed of the saw blade.
The surface speed of rotation is greatest at the equator and reduces.
Used in reference to surface speed of blade.
Such cylinders provide a ready way to achieve the constant surface speed.
The driving requirement would be a surface speed that matched the speed of the battlefleet.
The surface speed concerns the circumferential speed of the transport rollers and the embossing rollers.
The damage to our bow has cut our surface speed in half.
Surface Speed expressed in feet per minute or meters per second.
The rollers rotate at approximately the same surface speed to minimize slippage.
Therefore the surface speed of the roller is just r • w.
However, all belts are driven at the same surface speed.
It returns the constant surface speed selected by PLC.
See also
Their surface speed was slightly retreating, but their diving speed increased.
The second controller means controls the surface speed of the third dampening roller.
As the roll 7 spins the difference in diameter equates to significant variations in surface speed.
The second rotating drum has the same surface speed as the first rotating drum.
The small-diameter tools require high rpm to produce suffi cient surface speed.
The controller means automatically controls the surface speed of the first and second dampening rollers.
Her surface speed was 12 knots and submerged could reach nine.
The S value specifies the surface speed of the tool.
It had a maximum surface speed of 6 knots, and a maximum speed of 4 knots while submerged.
Instead, HMS programmers focus on surface speed and chip load.
Said second surface speed is substantially equal to said second speed of said product web ( 28 ).
S Defines speed, either spindle speed or surface speed depending on mode Data type = integer.
The surface speed of the forming wheel 6 is synchronized with the extrusion roll 's 7 surface speed.
The " processing speed " is equal to surface speed of the cooled annealing roller.
G96 Constant surface speed ( CSS ) T Varies spindle speed automatically to achieve a constant surface speed.
The rotating receiving surface 2 has a controlled linear surface speed which will be designated as V 2.
The surface speed is 11 knots and the underwater speed is 20 knots.
Each chop-off roll has a surface speed that exceeds the web speed.
In the Navigation main menu, tap the functional surface Speed limits.
As a result, they surface speed was 13.5 knots while their diving speed was increased further.
This led to a significant reduction of surface speed from 15 to 8 knots.
Licker-in roll 11 rotates in the same direction as feed roll 12, but at a higher surface speed.
The third roller was rotating with a surface speed of about 15 m / min.
The spinner bar 132 spins at a substantially constant rate of approximately 250 feet per minute surface speed.
The yarn spinning speed was determined by the surface speed of roll assembly 275.
Discharge calculation principle using surface speed measurements ( Source, WMO - LSPIV ).
The transition roller 173 is rotated at a slower surface speed than the plate cylinder.
The chopper arm 530 rotates creating a surface speed that exceeds the speed of the web 50.
Wheel material is typically CBN, and a typical wheel surface speed will be 115m/s.
The printing roll has at least 100 % greater surface speed than that of the substrate web.
In one example, drum 2 is run to produce a surface speed of about 10 metres / sec.
The transfer roller 23 is rotated at a faster surface speed than the metering roller 25.
The transition roller 173 rotates at the same surface speed as the plate cylinder 11.
You'll also be interested in:
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
