Examples of 'surface tack' in a sentence
Meaning of "surface tack"
surface tack - Surface tack refers to the stickiness or adhesive quality present on the surface of a material. It is commonly used in the context of adhesives, coatings, or finishes where a certain level of tackiness is desirable for bonding or adhesion purposes
How to use "surface tack" in a sentence
Basic
Advanced
surface tack
Of surface tack and performs at a wide range.
This method is effective in removing surface tack.
The surface tack of each plate was measured as described above.
Effect of prevulcanisation of latex on external surface tack.
External surface tack.
Effect of chlorination on external surface tack.
The surface tack may be modified by the addition of tackifier components.
One factor in this respect is the surface tack of a part.
Surface tack was also noted where evidence of extreme tackiness of the sample was evident.
A number of conventional approaches to controlling external surface tack have been evaluated.
The reduced surface tack lens can be more easily manipulated during surgical implantation.
Composition with improved scratch visibility and low surface tack.
Use of a tack material to increase the surface tack of a structure or laminate comprising.
Composition with improved long term scratch resistance and reduced surface tack.
Calculate the average surface tack for the batch for each ageing condition.
See also
It relates in particular to flexible coatings having low surface tack and surface tension.
This adhesive has a high surface tack which often results in blocking of the packaging film.
The refined oils serve to reduce viscosity and improve surface tack properties.
The measuring method for the surface tack factor is described in the example section.
Novolac resins were also modified so that both flexibility and surface tack can be managed.
For each of these samples Surface tack and scratch resistance were determined.
A PHA adhesive composition can have a relatively low surface tack.
This crystallization results in a loss of surface tack but does not detract appreciably from adhesion.
In this way, local areas of the material are provided with external surface tack.
High temperature curing leads to lower surface tack but does not overcome the tack problem.
After 3 hours the surface of the sample had only slight surface tack.
The significance of the surface tack of the Solid Electrolyte has been indicated hereinbefore.
These coatings are both flexible and have low surface tack and surface tension.
So, the surface tack is large and is easily damaged.
In fact for use as an adhesive, a certain level of surface tack would be required.
Surface tack of the gelled plastisol films was measured using the following ' loop tack test '.
When the surfaces of the photopolymer become dirty, the surface tack can decrease.
Surface tack time value of PHA2 was zero seconds.
By this method, novel curable prepregs having very good surface tack can be produced.
After storage, external surface tack was assigned as follows, Assessment of Outer Surface Tack.
This higher density cross-linking of the polymer surface will contribute to reduced surface tack.
Surface tack was improved, avoiding the known problems with long-term storage.
The adhesive blends have a surface tack time value of at most about 15 seconds.
Table 5, Effect of silicone on external surface tack.
The composition can have a surface tack time value of, for example, at most about 15 seconds.
Table 7, Effect of zinc oxide level on external surface tack.
SURFACE TACK, Surface Tack was determined by applying firm finger pressure for 10 second.
Table 1, Photopolymer plate surface tack Example.
You'll also be interested in:
Examples of using Tack
Show more
I will tack you up on the wall to dry
The welfare state has to change tack
Some florists tack on hefty wedding fees
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
