Examples of 'swelling ratio' in a sentence
Meaning of "swelling ratio"
Swelling ratio: Refers to a situation where the proportion, rate, or scale of something is increasing or expanding
How to use "swelling ratio" in a sentence
Basic
Advanced
swelling ratio
The swelling ratio is determined by the method described below.
The method of measuring the swelling ratio is described as follows.
The swelling ratio can also be measured by viscosity measurements.
Determination of the swelling ratio.
The swelling ratio increased with increasing of polymer concentration.
Within that range of crosslinking the swelling ratio is minimal.
Swelling ratio percentages were calculated using the formula set forth above.
It can be clearly seen that the swelling ratio depends strongly on the pH.
A higher swelling ratio gives faster release of chemically reacted or entrapped agent.
This produces a more soft gel compared to the basic hydrogel and with a higher swelling ratio.
The swelling ratio of the dried hydrogel particles is determined in saline solution.
In general, such extraction increases the swelling ratio of the formed hydrogel.
Higher swelling ratio also provides better absorption for sanitary uses.
From the weight before immersion and the weight after immersion, the swelling ratio was calculated.
The swelling ratio is roughly inversely related to the solubility parameter of the solvent.
See also
Besides, the invention gives a higher swelling ratio than other previous multimodal technology.
The swelling ratio and solubility parameter are determined by the methods described below.
The method used to determine the swelling ratio for any given polymer comprised the following,.
The swelling ratio can be controlled by adjusting the reaction condition in the curing reaction.
The thusly dehydrated gel, when put into a drug solution, reswells to the initial swelling ratio.
The values given for the swelling ratio SR are the average of five independent measurements.
The measurement of each of the properties is carried out as follows . Swelling ratio.
Maximum variations in swelling ratio at constant irradiation times for systems 1 to 5.
The PEG-containing hydrophilic layer may include a PEG hydrogel having a swelling ratio.
Maximum variations in swelling ratio at constant luminous dose for systems 1 to 5.
The controlled release agricultural product of claim 7 having a swelling ratio of at least about 10.
A swelling ratio approaching the value of 0 marks the endpoint of degradation.
Said polymer hydrogel having a swelling ratio in distilled water of at least 50.
The swelling ratio depends upon the degree of cross-linking of the gel.
Example 5 Measurement of the swelling ratio of a membrane prepared in example 4.
The swelling ratio was calculated according to the formula, EPMATHMARKEREP.
Figure 10 shows the equilibrium swelling ratio of HA-gelatin films.
However, the swelling ratio of croscarmellose sodium is lower than that of sodium starch glycolate.
The polymer hydrogel of item 48 having a swelling ratio of at least about 100.
In this case, the swelling ratio was read from the graduation on the measuring cylinder.
In some embodiments, a crosslinked macromolecular matrix may have a swelling ratio of about 20 to about 200.
In some embodiments, the swelling ratio is measured in isotonic solution and neutral pH.
The absorbent product for personal care of claim 11 having a swelling ratio of at least about 100.
The swelling ratio is calculated as follows, EPMATHMARKEREP.
Measurement results of the swelling ratio for each fluid oil fraction are shown in Fig . 2.
The swelling ratio is calculated according to the formula, EPMATHMARKEREP.
The equilibrium swelling ratio of the hydrogel films in PBS is shown in Figure 10.
The swelling ratio of porous scaffolds increase with an increase of the freeze-drying vacuum ( figure 5 ).
Figure 5, Swelling ratio as a function of the freeze-drying pressure.
The swelling ratio ( q = V / Vcoll ) defines the degree of swelling of the microgel particles.
The swelling ratio is expressed as, swelling = ( g swollen polymer-g dry polymer ) / g dry polymer.
The swelling ratio ( SR ) is defined as following,.
A swelling ratio by volume in ASTM 3 oil of less than about 20 %.
You'll also be interested in:
Examples of using Ratio
Show more
Gross enrolment ratio at secondary level percentage
Ratio of owned versus leased office space
See proper dilution ratio instructions on bottle
Examples of using Swelling
Show more
A little swelling right in here right now
I also appreciated some swelling in the knee
There is swelling in your right temporal lobe
