Examples of 'switch can be used' in a sentence
Meaning of "switch can be used"
The phrase 'switch can be used' implies that a switch, referring to a device or mechanism, has the capability to be utilized or activated for a particular purpose. The context would depend on the specific type of switch being referred to. Switches are commonly used in electrical circuits to control the flow of current or to toggle between different modes or positions. In a broader sense, the phrase indicates the versatility or flexibility of a switch in performing its intended function
How to use "switch can be used" in a sentence
Basic
Advanced
switch can be used
A switch can be used to open or close a circuit.
Also a multistage switch can be used.
This switch can be used to allow it to trust.
Either the right or the left switch can be used.
Such a type of switch can be used in a control interface.
This means a much less sophisticated ATM switch can be used.
Multiport switch can be used for creating such a delay.
As an alternative, a motor protection switch can be used.
This switch can be used when the remote controller is missing.
In lieu of a magnetic sensing switch, a mechanical switch can be used.
This switch can be used to switch the diffuser on and off.
To prevent the pump running dry, a pressure switch can be used.
This turn switch can be used to switch the flatbed on or off.
To protect the bonnet, the adjustable gold coloured pressure switch can be used.
This switch can be used to switch the speaker on and off.
See also
A smaller power-domain has the advantage that a smaller switch can be used.
This switch can be used together with the wired remote controller.
In the active configuration, a transistor type switch can be used to discharge the blocking capacitor.
The coding switch can be used to select the characteristic of the valve.
If the Green Mode is not needed, a remote toggle switch can be used.
The torque selector switch can be used to select three torque settings.
Where a 12 Volt circuit is fitted the installation of a series - parallel switch can be used to.
A single switch can be used to supply power to units on the same system.
Advantageously, customer signals received at the toll switch can be used to control DACS connections.
The wall switch can be used in conjunction with the thermostatic remote control.
Likewise, the - side of the toggle switch can be used to select a desired gear.
An RF switch can be used as the selective coupling means.
Any suitably dimensioned, single-pole switch can be used for switching one-speed curtains.
The switch can be used as a low power DC mobile power supply.
Start backwash The “ Start backwash ” switch can be used to start a backwash.
The twilight switch can be used to determine the point at which this happens.
This switch can be used if it is desired to take a particular gamemaker 74 off line.
The phase inversion switch can be used to to reach the best result possible.
The switch can be used in various switch apparatuses for controlling on / off of a circuit.
The mechanical 2-speed gear switch can be used to select the speed range required.
The MUTE switch can be used to start and stop the metronome while practicing.
The - npd ( or - NoPrintDialog ) switch can be used in conjunction with the - p switch.
This switch can be used only when POWER is set in the ON position.
Thus a limit switch can be used for the normal operation of the equipment.
This switch can be used to raise or lower the tweeter level by 3 dB.
In practice a REED switch can be used as the input switch, for example.
The switch can be used in wardrobes, cabinets, closets, cupboard.
A position limit switch can be used to indicate that the valve has opened.
A limit switch can be used to emit a signal for drive switch-off.
The cold-shot switch can be used to fix the hairstyle.
This switch can be used together with a Philips Power remote control SBC SR315.
The Wall Switch can be used to control your fi replace.
The MUTE switch can be used to switch the sound off and on.
GROUND LIFT switch can be used to eliminate humming caused by ground loops.
The 3mode switch can be used to control the inner reflector of the unit.
You'll also be interested in:
Examples of using Used
Show more
Not to be used if you have a heart condition
The correct presser foot is not being used
I used to play a little ball myself atWhittier
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Can
Show more
You can have all the rest
Things that you can barely imagine
Sou can manage the company alone
