Examples of 'switch is set' in a sentence
Meaning of "switch is set"
This phrase is commonly used in the context of electronic devices, indicating that the switch has been adjusted or activated to a certain position or setting
How to use "switch is set" in a sentence
Basic
Advanced
switch is set
The antenna selection switch is set incorrectly.
Switch is set to the correct voltage.
The power main switch is set to on.
This switch is set at the factory and should not be altered.
Make sure that the power switch is set to on.
Video source switch is set to external receiver mode.
The power turns on when this switch is set to.
The key switch is set to the locked position.
May be affected if the switch is set.
Note that this switch is set on at the time of shipment.
Alarm recording starts when the alarm switch is set on.
Verify the pin switch is set to the proper height.
Negative ions are produced when the main switch is set to.
As soon as the time switch is set the control lamp glows.
Switch is set.
Ensure the outlet activation switch is set to automatic mode.
The pressure switch is set in the foctoru for the high water level and usage.
Check if the frequency selector switch is set to the same channel.
Make sure the switch is set to off before plugging the plug into the socket.
Always check to ensure that the selector switch is set to the correct function.
The key switch is set to the LOCK position.
Push this button to select or measuring when the function switch is set at position.
The air pressure switch is set after all other adjustments have been made.
Check that the economy switch is set to OFF.
Main switch is set to REMOTE but no remote present.
Ensure that the voltage selection switch is set to the correct voltage.
If the switch is set to INT the external speakers will not function.
At very low flow rates the switch is set to its alternate position.
The display returns to the regular screen when this switch is set to OFF.
The power switch is set to the SE position.
Dust reduction works when the power switch is set to ON.
The upper rotary switch is set to AUTO in normal mode.
Switched on with the switch on the bottom switch is set to ON.
The sliding switch is set to Fwd.
The controller will only provide the diagnostics when the selector switch is set to HEAT.
Verify that the voltage selection switch is set correctly for your location.
Main switch is set to the OFF position.
Be sure the RINGER switch is set to the.
The POWER switch is set to ON but the subwoofer does not work.
Make sure the power switch is set to OFF.
If switch is set to position I or Position II mixer will start automatically.
Be sure the battery type switch is set to Charger position.
The GAIN information appears first when the OPERATE switch is set to ON.
Ensure that this switch is set at OFF when the amplifier is not in use.
Check to make sure the subwoofer wireless ID switch is set to the same.
The POWER switch is set to the OFF position.
Make sure machine is unplugged and the directional switch is set to the OFF position.
The pressure switch is set and lead-sealed at the factory.
Check to see if the REC SELECT switch is set correctly.
When switch is set to the desired speed, motor will run.
You'll also be interested in:
Examples of using Set
Show more
These targets are set as cumulative national goals
Set days and time of regeneration or recharge
The units may be set to different channels
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
