Examples of 'switch on the device' in a sentence
Meaning of "switch on the device"
To switch on the device means to activate or turn on an electronic device by using a power switch, button, or control mechanism. This action allows the device to start functioning and perform its intended tasks or operations
How to use "switch on the device" in a sentence
Basic
Advanced
switch on the device
Only switch on the device if your hands.
Press the button to switch on the device.
Do not switch on the device without water.
Proceed as follows to switch on the device.
Do not switch on the device without milk.
Insert the plug and switch on the device.
Switch on the device during washing to achieve.
Hit briefly to switch on the device.
Switch on the device as described above and.
Fore you switch on the device.
Switch on the device with the button.
Not possible to switch on the device.
Switch on the device at the mains switch.
Turn on the ignition and switch on the device.
Always switch on the device before placing it.
It will however take somewhat longer to switch on the device.
You can switch on the device as follows.
Connect the mains plug and switch on the device.
Do not switch on the device immediately after transporting it.
Replace the batteries and try to switch on the device again.
Switch on the device you want to use your.
Put the plug in the socket and switch on the device.
Switch on the device using the main switch.
Remove any setting tools or spanners before you switch on the device.
Now switch on the device and immerse into.
Reinsert the plug into the socket and switch on the device.
Switch on the device as previously described.
Rectly inserted into the device before you switch on the device.
Switch on the device that you wish to operate.
The welcome note or image is displayed briefly each time you switch on the device.
Always switch on the device before.
Check that the batteries are inserted correctly and try to switch on the device again.
Switch on the device and let it run until.
Press the on / off switch to switch on the device.
Switch on the device before selecting it as an external source.
Use the main switch 6 to switch on the device.
Switch on the device and continue the splitting operation.
If the session needs to last longer, switch on the device again.
Switch on the device and set the speed and.
The fill-detection means could also serve to switch on the device.
Do not switch on the device with an empty glass jar.
To start the second treatment, press the mode button to switch on the device again.
Do not switch on the device during the charging process.
Carrying out measurements - Press the button to switch on the device.
Never switch on the device with damp or wet hands.
When the device is under sleep mode, press Power button to switch on the device.
Always switch on the device before introducing it to the workpiece.
To completely turn off the high pressure cleaner, press the ON / OFF switch on the device.
Only switch on the device if your hands and feet.
NOTE, you must complete assembling fully ; otherwise you can not switch on the device.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Device
Show more
Place the device securely on an even surface
There are no external forces applied on the device
Do not carry the device in a breast pocket
