Examples of 'switch settings' in a sentence
Meaning of "switch settings"
switch settings - This phrase is used when referring to the adjustment or change of settings on a device or electronic system. It implies the act of selecting or switching between different configurations or options to modify the behavior or functionality of the device or system
How to use "switch settings" in a sentence
Basic
Advanced
switch settings
The changed memory switch settings are printed.
Function of relay contact activation determined by switch settings.
Check switch settings and black potentiometer.
Use the utility to configure the switch settings.
Check dip switch settings on receiver.
Configure the following switch settings.
Ras dip switch settings figure.
Find exact information regarding the switch settings below.
Check the switch settings on the back of the amplifi er.
A list of the current memory switch settings starts printing.
The dip switch settings are incorrect in the remote control.
Make sure the remote control switch settings are correct.
Memory switch settings can be used to disable the buzzer.
The volume screen appears when you switch settings.
Dip switch settings are only updated when the unit is turned on.
See also
Check all switch settings.
Use the following table for recommended switch settings.
Higher switch settings will result in more volume from the tweeter.
Th e operating switch allows for the following switch settings.
The changed memory switch settings are saved and a list of them is printed.
This is repeated for each of the switch settings needed.
Verify dip switch settings on transmitter and receiver units are set the same.
Set your emulation mode according to the switch settings below.
Following table shows possible switch settings and corresponding delay times in seconds.
This signal is available at all times for all switch settings.
Any attempt to change the timer switch settings will invalidate the warranty.
The operating switch allows for the following switch settings.
Experimenting with various switch settings will not harm the amplifier or your telephone.
The compressor unit starts and stops based on preset pressure switch settings.
The following illustration shows how the switch settings correspond to the signal selection.
Your automatic juicer is equipped with a display to read out the switch settings.
Experimenting with various switch settings will not harm the amplifier or your phone.
Remember to turn off the power supply before checking the dip switch settings.
The switch settings are set at MAGNETROL during setup.
The following table illustrates the required switch settings for each selection.
Control board DIP switch settings or firmware version may be incorrect.
Some of the connection options and the corresponding switch settings are described later in.
Proceed the DIP switch settings prior to mounting the counter.
When using more than one transmitter use different switch settings on the transmitters.
Incorrect DIP switch settings or firmware version for that specific model.
If the SCSI IDs or termination switch settings displayed.
Complete the switch settings before turning ON the schedule timer power.
Service may ask you to verify DIP switch settings.
Be sure to check the DIP switch settings before setting up the camera.
The fan levels result from the following DIP switch settings.
The amplifier uses the DIP switch settings to set the power requirements.
See the following section for details on available DIP switch settings.
We made it easy to customize your Kill Switch settings based on your security preferences.
Make certain that power is turned off before changing DIP switch settings.
DIP switch settings are not recognised until a brief interruption to the power supply.
You'll also be interested in:
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
Examples of using Settings
Show more
I brought place settings for you to look at
Settings in bold indicate the recommended method
Adjustments and settings in the menu continued
