Examples of 'switch to select' in a sentence
Meaning of "switch to select"
A switch to select refers to a mechanism or device that can be used to choose or change between different options or settings
How to use "switch to select" in a sentence
Basic
Advanced
switch to select
Rotary switch to select the measurement range.
Use POWER selector switch to select grill.
Switch to select the appropriate system input voltage.
Use the sliding switch to select the desired function.
Switch to select between absolute and relative measurements.
Use the top rotary switch to select the device.
Turn switch to select power level for cooking or defrosting.
The user then selects the level switch to select the desired difficulty level.
Rotary switch to select functions and to turn the power on or off.
Press the MENU rocker switch to select the Setup menu.
Slide switch to select the operation mode of the electronic crossover.
Use POWER selector switch to select power level.
Mode switch to select the switching condition reverse character - istics.
In most situations, set this switch to select the reverse mode.
Set this switch to select microphone input sensitivity attenuation.
To select a channel, turn the channel switch to select the respective channel.
Use this switch to select the source to be recorded.
To operate the legrests push the mode switch to select the " actuator mode.
Use the switch to select your desired.
To recline the backrest angle push the mode switch to select the " actuator mode.
Use slider switch to select required fan speed.
Press the release button 5 on mode selector switch 6 and rotate the switch to select.
Use this switch to select the reverse mode.
Set the connection panel 's MIC SIGNAL switch to select.
Use the rear switch to select track or catenary power.
Used with the VERTical MODE switch and Trigger SOURCE switch to select X-Y operating mode.
Use the upper switch to select track or catenary power.
Mode selection menu, Direction up and down, switch to select.
Use this switch to select the desired charging speed.
The AccuMate is extremely easy to operate having only one switch to select either 6 or 12 V.
Use this switch to select the phase of the subwoofer.
SW 202 is an intermittent continuous functional selection switch to select the continuous or intermittent operation.
Depress this switch to select the OverEasy compression characteristic.
H3 Press the power switch to select the mode.
Use this switch to select the input to be sent to the individual channel.
Difficulty selection menu: Direction Up and Down: switch to select different difficulty. START: confirm.
Use this switch to select the proper stepping for your area.
Conversely, a digital " 0 " causes the switch to select a negative current step.
Use this switch to select between the different Charge Rates and the Engine Start Mode.
Turn on the power switch to select your desired power.
Switch to select the operation mode of the electronic filter driving 5-CH section of the.
Slide the alarm period switch to select between the alarm periods.
Switch to select the crossover frequency with subwoofer operation 20.
Use the charge rate selector switch to select the charge rate or engine start setting.
Slide switch to select lowpass or fullrange operation for channel CH5 on the active crossover.
The hood has a multi-position switch to select the extraction speed of the air.
Turn this switch to select a function or turn the meter OFF.
Inside the battery compartment, Switch to select the transmission power, HI or LOW 7.
Press the switch to select outside / recirculated air positions.
MP3/WMA player Use this switch to select a desired file or disc.
You'll also be interested in:
Examples of using Select
Show more
Select the data to display on that line
You can not select multiple events
Select and implement risk management system
Examples of using Switch
Show more
The floating switch is blocking in automatic operation
Opera never survived the switch to electric
Set the switch to the correct position
