Examples of 'switching output' in a sentence
Meaning of "switching output"
Switching output refers to the act or process of redirecting or changing the flow, direction, or source of something, such as power, electricity, signals, or information. It involves switching between different outputs or channels to control or alter the destination or routing of the output. Switching output is often seen in electronics, telecommunications, computer networking, or audio/video systems
How to use "switching output" in a sentence
Basic
Advanced
switching output
The switching output is located under a cover.
A semiconductor is used for the switching output.
Characteristics of switching output configurable as window or hysteresis.
Position and function of each switching output.
Switching output responds within a few microseconds.
Two programmable temperature switching output.
Switching output configurable as window or hysteresis.
Hybrid mode is rendered possible by switching output drivers within a graphics context.
Each switching output can have the switching element func.
This change is detected by an integrated oscillator and converted into a switching output.
The tamper switching output can also be connected to a security system.
One switch point and one hysteresis can be set to each switching output.
The electronics and the switching output of the level switch are checked now.
A command over the data interface generates a wiping impulse at the switching output.
The switching output will change if you set one of the two mode switches afterwards.
See also
To indicate the status of the switching output red LED.
A per switching output Ambient conditions Compensated temperature range saturation level measurement.
ZeroSmog The rear floating switching output is closed when a tool is in use.
Alternatively also available with an NPN instead of a PNP switching output.
OPEN The binary status of the switching output no longer corresponds to the current process.
The new Energy Actuator determines the active energy consumption per switching output.
LED display with switching output status.
To be able to initiate actions, the safety module has at least one switching output.
NORMAL OP The binary status of the switching output corresponds to the current process.
Two separate signalling circuits can be connected to the relay, each controlling a switching output.
Example for switching output 1 normally open.
Alternatively with IO-Link and 1 x programmable switching output.
When lit, the switching output is activated closed.
Air consumption measurement [ ConS ] can be activated for switching output Out A.
The switching output display can be activated or deactivated from the “ Parameters ” menu.
Red signal lamp flashes switching output high-impedance.
Switching output 1 is supposed to switch to the pre-set temperature.
On Display is red when the switching output is High 1.
Switching output 1 is supposed to switch to the pre-set fluid level.
OFF Display is red when the switching output is Low 0.
The switching output will change if you set the mode switch ( 2 ) afterwards.
In other words, the two windings of the transformer are directly connected to switching output S 1, S 4.
Low-resistance switching output with PNP technology.
Switching output Potential-free, not for SELV.
Signal lamp - Switching output yellow.
Switching output Potential-free, for SELV, if the whole device switches SELV.
NORM . CLOSED The contact type of the binary switching output B1 is " normally closed.
Switching output 2 is always switched in addition on pin 2 of the M12 connector.
NORM . OPEN The contact type of the binary switching output B1 is " normally open.
Switching output 2 Off / on Activates the potential-free OPT2 output.
With power indicator ( red ) and digital switching output indicator ( green ).
Switching output 1 Off / on Activates the potential - free OPT1 output.
The safety module 20 also has a switching output 22 with a plurality of output terminals 24 a.
Testing the binary switching output B1 by changing its binary status.
In submenu Coux, “ Test Switching Output ” to test the desired switching output.
You'll also be interested in:
Examples of using Switching
Show more
For switching the speaker on and off
Manual selection and switching of the camera
Switching only if applicable to the model purchased
Examples of using Output
Show more
One output will contribute to this outcome
Illuminates when output is sent to the tray
Output signals common to measuring technology are available
