Examples of 'synchronization code' in a sentence
Meaning of "synchronization code"
synchronization code: This term refers to a set of instructions or procedures in programming that ensure different processes or components operate in a coordinated or timed manner
How to use "synchronization code" in a sentence
Basic
Advanced
synchronization code
Change synchronization code to every fifteen seconds.
Each synchronization symbol carries both the primary and the secondary synchronization code.
A primary synchronization code is transmitted for a frame and a phase reference.
The sequence header code is data representing a start synchronization code for the sequence layer.
The primary synchronization code appears once in each time slot contained in a transmitted frame.
The group start code is data indicating a start synchronization code for the GOP layer.
Recognizing the synchronization code within a noisy environment calls for known signal processing techniques.
Figure 6 is a flow chart of secondary synchronization code assignment.
The primary synchronization code is a constant code that denotes the beginning of the time slots.
Means for storing said synchronization code word, and.
The frame synchronization code word S marks the commencement of each batch of code words.
This generates, for each hypothesized secondary synchronization code location, a correlation value.
Parts ofthe time synchronization code and executive are common with the Network Hubs and trackers.
Bits later, the central station will broadcast a new synchronization code word.
A user equipment configured to mitigate synchronization code interference in a wireless communication system, comprising,.
See also
Each of 16 possible base station code groups are assigned to a unique secondary synchronization code.
There are 28 different synchronization codes and one synchronization code is assigned to each área.
The lowest 19 bits of this fixed code sequence form the synchronization code identifier.
First, the secondary synchronization code is used to identify the frame timing of a base station.
Figure 4 illustrates time offsets used by differing base stations sending primary synchronization code signals.
A secondary synchronization code ( SSC ) is then detected for the determined location from the processed signal.
During the random access process, the uplink synchronization code is also described as signature.
Synchronization code words will be found periodically in the data register 33.
Specifically, the picture start code is data representing a start synchronization code for the picture layer.
The synchronization code 502 shows when or where a logic frame begins.
WCDMA base stations transmit a secondary synchronization code ( SSC ) that serves two functions.
The synchronization code can comprise four synchronization bytes ( FAW1 to 4 ) in the overhead data.
The first of the two orthogonal sequences is the primary synchronization code ( PSC ) sequence.
A primary synchronization code ( PSC ) is a sequence used for the PSS.
The PSS comprise a primary synchronization code ( PSC ).
Such synchronization code word includes 32 bits having the binary values indicated on FIG . 2C.
Identifying the relative locations of a primary synchronization code ( PSC ) and a secondary synchronization code ( SSC ) ; and.
The synchronization code sequence generating circuit 601 generates a matrix V as a synchronization code sequence signal S61.
The method can include generating a primary synchronization code ( PSC ) and a secondary synchronization code ( SSC ).
Synchronization code sequence generating circuit 602.
Register 38 is connected in the same manner as synchronization code word register 35.
Note, however, that synchronization code SYS0 is treated as having a type number of 1.
Then, a search process is undertaken to identify the 28-bit synchronization code.
The synchronization channel carries two synchronization codes, a primary synchronization code 203 and a secondary synchronization code 204.
The first three rows of each block 50 store a specific 12-byte synchronization code.
Change the logic mode! Change synchronization code to every 15 seconds!
At 804, a primary synchronization code ( PSC ) can be generated based upon the selected PSC sequence.
As such, the preamble comprises a binary synchronization code that is 4096 chips long.
At 802, a primary synchronization code ( PSC ) sequence can be selected based upon a parameter of a base station.
Each base station 14 transmits a primary synchronization code ( PSC ) in a primary synchronization channel ( PSCH ).
Note also that synchronization code S4 is inserted between frames 1 and 2 as shown in Fig . 1.
You'll also be interested in:
Examples of using Code
Show more
I was told there is a code of silence at these things
Code qualifying the type of payment terms
Shell design code pressure vessel code
Examples of using Synchronization
Show more
Perfect synchronization with the main spindle
Adjust line and field synchronization in menu
Synchronization function is not available in this version
