Examples of 'table extension' in a sentence
Meaning of "table extension"
table extension: This phrase refers to a removable or additional piece of a table that can be inserted to increase the table's length or surface area, typically used for accommodating more people or items
How to use "table extension" in a sentence
Basic
Advanced
table extension
Table extension for construction circular saw.
Repeat with the other table extension.
Slide the table extension to the desired width.
Ambiance lighting and optional table extension.
Deploy the table extension and retighten both.
To use the sliding table extension.
Hang the table extension on the saw table.
This machine is supplied with two table extension wings.
Extra table extension to the right.
Attach the other end of the rear table extension to the.
Move the table extension in arrow direction and lower it.
Do not use another person as a substitute for a table extension or as additional support.
Slide the table extension on the side your workpiece.
Increase the length of the saw table by using the table extension.
Make sure that the table extension is correctly hooked.
See also
Table extension with stock stop to cut longer workpieces safely.
Allows you to lock the table extension at desired distances.
The two longer braces are required for the longitudinal table extension.
Pull the sewing table extension p out towards the left.
The material stop can be mounted on either side of the saw table extension.
Raise the table extension p until it is released from the catch.
Check that both tables are flush and mount the table extension via the.
Press down on the table extension to ensure the table extension is properly seated.
To change your machine over to free arm operation simply remove the sewing table extension p.
Check that each base table extension is in the closed position and locked in place.
To ensure that the tables are level, place a straight edge on the table extension.
Place the table extension arms under the tile for the best possible support.
That 's why it may be a good idea to choose a table saw with table extension.
Folding out the table extension Fold up the table extension.
Elektra-Beckum construction circular saw table extension.
Unlock the table extension by releasing the cam lock lever P.
Loosen locking knob 7 and pull the table extension 3 out to.
Locate the Feed Table Extension in the accessory package.
Bolt two support arms ( B ) onto each table extension.
The Feed Table Extension must be installed for proper operation.
Set the desired table width and stop the table extension with the stop lever 52.
Place the left table extension next to the saw table, aligning the mounting holes 1.
Mounting the Workpiece Support ( see figure B ) - Insert the workpiece support 1 into the table extension.
Installing rear table extension fig . i.
The table extension for large work pieces ( “ TL ” version ) provides a larger support surface.
Stop lever for table extension 14.
Mount the table extension ( I ) either left or right of the machine table.
For ease of installation ; extend the table extension fig . 42.
Adjust the saw table extension 38 to the desired length.
Dismount add-on parts fence, sliding carriage, table extension.
Image 20 - Follow the table extension with vases in the same shape and height.
Mount the length gauge ( B, Fig 4 ) to the left or right table extension.
Place the table extension ( 19 ) on the protruding table supports.
Fit the support leg ( G ) into the work table extension ( H ) and align the.
Place the table extension ( 5 ) on the protruding table support strips fig . D6.
You'll also be interested in:
Examples of using Extension
Show more
This second extension must be authorized by a judge
The applicant shall be informed of any extension
Do not use extension cords or multiple sockets
Examples of using Table
Show more
The latest tour de table is publicly available
Table i drivers of satisfaction related to access to services
Replace the table with the following
