Examples of 'tack-free' in a sentence
Meaning of "tack-free"
Tack-free is an adjective used to describe a surface or substance that is free from adhesive stickiness
How to use "tack-free" in a sentence
Basic
Advanced
tack-free
The images were satisfactory and tack-free.
The tack-free condition is also referred to as stick clean.
The microspheres of the invention are tack-free.
Tack-free times were run as a continuation of the set time test.
In the solid state the layer is tack-free.
Heat activated tape is usually tack-free until it is activated by a heat source.
The resulting advanced resins are viscous liquids or tack-free solids.
A tack-free surface with good solvent resistance resulted in each instance.
The product leaving the machine has a tack-free surface.
Curing to a tack-free state generally takes place in a matter of a few minutes.
The printing surface of the plate was smooth and tack-free.
This tack-free sealant process eliminates the need for a conditioner application.
An aqueous coating containing the polymer dries tack-free before curing.
Tack-free time was based on touching the film with light finger pressure.
Adhesive was applied to one strip of paper and dried to a tack-free state.
See also
This is evident from both the tack-free times and the adhesion properties.
Cure time is the time required at that temperature to produce a tack-free polymer.
The tack-free state is achieved after the passage of significant time, sometimes hours.
Conventional curing conditions may be employed and typically provide a tack-free surface.
At this stage, the resins are practically tack-free but are still soluble and fusible.
The melt-flowable sheet made with epoxy polyester compositions may be tacky or tack-free.
In all cases, the time needed to establish tack-free drying is given in the table.
The cream, gel and tack-free times are measured for each of the reaction mixtures.
These results are particularly visible as regards the tack-free time and the curing time.
Process for producing tack-free hotmelt material and device for producing the same.
A further of this invention is to provide a process for producing said permanently tack-free printing plate.
The novel polymer of the present invention provides tack-free photoimageable compositions, permitting contact imaging.
The treated backings were heated until the pretreatment resin had cured to a tack-free state.
Determination of tack-free time of the film,.
With some compositions, simply removing the solvent during prepreg fabrication yields tack-free prepreg.
Always tack-free finishing.
Additives such as paraffinic oil can also be added to enhance tack-free properties during cure.
The tack-free time at ambient temperature was about 3 days.
The coating under the SMD 's remained liquid while the exposed areas were tack-free.
The tack-free surface is designed to accommodate printing indicia 38 directly thereon.
With others, advancement is required to yield tack-free prepreg.
The fabric is tack-free and flexible and has high moisture-permeability.
The formulation is coated on an object, and dried to a tack-free state.
The poly ( siloxanes ) help to provide a tack-free surface, desirable for contact printing.
The UV-curing polymer provides instant curing and tack-free time.
The coating demonstrated a tack-free surface after the 5 minutes of UV-A exposure.
A film of this material on a glass plate was clear, glossy, and tack-free.
Of course, the film coating becomes tack-free prior to becoming buffable.
This provides a non-yellowing high gloss film which quickly becomes tack-free.
The melt-flowable layer of the sheet is tack-free at room temperature.
Table 1, Tack-free times for the silylated polymers of the present invention.
This combination of pot-life and fast tack-free time is desirable.
A rigid, dry, tack-free film with no amine odor is obtained.
Water resistance was evaluated after the films were tack-free and after 1 day.
The bars became tack-free after nearly 30 minutes.
