Examples of 'tap hole' in a sentence
Meaning of "tap hole"
tap hole: A hole drilled into a container, typically a barrel, cask, or tank, to allow for the extraction or drainage of liquid contents. This phrase is commonly used in manufacturing, brewing, and construction industries
How to use "tap hole" in a sentence
Basic
Advanced
tap hole
Machine for boring a tap hole of a shaft furnace.
The tap hole and lip are not illustrated.
At least one sealed tap hole structure comprising.
Pig iron jet from the blast furnace tap hole.
It is mentioned that other tap hole constructions are known.
The circular closure is sized sufficiently to close the tap hole.
No vapor tap hole was present in the dip tube.
They will be advertised as a one or two tap hole option accordingly.
Stopper for a tap hole of a steel converter and method of operating a converter.
This helps achieve optimum centering of the new tap hole.
This figure depicts tap hole and screw hole locations only.
Other problem is the linearity of guide channel in the tap hole drilling machine.
The structure of the tap hole is consequently much simplified and less costly.
Universal chuck for a machine for piercing a tap hole of a shaft furnace.
The tap hole construction in accordance with the invention is set out in claim 1.
See also
Rotator where the connections and tap hole through the shaft are parallel.
Liquid metal can be tapped from the supply vessel through the bore tap hole.
The method of renewing the tap hole construction of both Figs.
Pig iron and slag are tapped off vÃa a tap hole 7.
The positioning of the tap hole 5 is also indicated.
The molten products accumulate up to the level of the tap hole 8.
How close to an old tap hole can a new tap hole be made?
This construction is simple and permits easy sealing of the tap hole after tapping.
By way of example, a slag drain tap hole área may require additional cooling.
Preferably, the lateral supply balcony will be positioned near the tap hole.
Thus, the time restriction to the tap hole drilling will be more strict.
Better not to stand hives facing north, as a cold wind will penetrate the tap hole.
Furthermore, there is a strict time restriction to the tap hole drilling at a blast furnace.
The tap hole 8 is placed between two tuyeres, slightly below them.
In this nucleus bees themselves protect from theft, you only reduce the tap hole.
With metallurgical vessels provided with a tap hole 1 as in accordance with Fig.
At the end of the treatment, the steel is poured through the tap hole 17.
A further tap hole may be made using a tap with the guide wire 49 as a guide.
Thus retained melt is intermittently taken out from the tap hole 27.
The vapor tap hole 26 is preferably smaller than the liquid entrance hole 24 and exit orifice 12.
Fig . 15 is a side view of a conventional, compressed air driven tap hole drilling machine.
The base part also includes a tap hole 58 to receive a forward part shown in FIG . 6b.
A first annular zone 10, called the inner zone, surrounds the tap hole.
Fig . 3 shows an annular brick used in the tap hole construction of Fig . 2.
More specifically, this screw / nut system comprises a screw 16d introduced into the housing 1 by a tap hole.
Tap Hole - manufacturer, factory, supplier from China.
FIG . 5 represents a cross-section through the furnace of FIG . 4 at the level of the tap hole.
You'll also be interested in:
Examples of using Tap
Show more
The water tap is blocked or there is limescale on it
Fit new gasket seal to replacement tap
Tap into electronic forms of data collection
Examples of using Hole
Show more
So does that giant hole in the wall there
The hole of the steam spout is clogged
Cut the piping hole sloped slightly
