Examples of 'tape speed' in a sentence
Meaning of "tape speed"
tape speed - This phrase is used to describe the rate at which a tape (or any recording medium) is moving during recording or playback. It can also be used metaphorically to indicate that something is happening quickly or at an accelerated pace
How to use "tape speed" in a sentence
Basic
Advanced
tape speed
There is also some variation in tape speed.
The tape speed appears on the television screen.
You can increase or decrease the playback tape speed.
Tape speed is a factor because of the shift in wavelengths.
Adjustment of tape speed and temperature.
The recorded frequency range was dependent on the linear tape speed.
The tape speed is now known.
This rendered possible a very high head to tape speed with a slow tape run.
Select the tape speed that best suits your needs.
A control system ensuring tape transport with a fixed nominal tape speed is always needed.
Select the tape speed to the same speed as that used.
The high bandwidth required to effectively record a digital audio signal necessitates a high tape speed.
Tape speed is not the only factor affecting the quality of the recording.
The resulting locally stationary audio signal is encoded together with the applied tape speed changes.
The tape speed can be controlled using the PITCH CONTROL.
See also
Press SPEED to select the desired tape speed SP or SLP.
Set TAPE SPEED to the desired tape speed.
Press the SPEED button to select the desired tape speed SP or SLP.
Since the tape speed is irregular, wow and flutter occur.
Data monitoring, pulsations and tape speed.
The tape speed is detected automatically by a notch in the cartridge 's case.
Thus, the first measurement is performed with known tape speed.
By turning it to the left, the tape speed becomes slower, resulting in lower pitch.
Similarly, some units were subject to the capstan wear, causing a decrease in tape speed.
Tape speed and tension are controlled electronically via the reel motors ; there is no capstan.
This comparison results in the magnetic tape 2 being driven with a customary reproduction tape speed.
Originally played in C major, the tape speed of the coda was increased slightly during mixing.
All models allow pitch control by varying the sample rate, and thus tape speed accordingly.
Tape speed is normal when the PITCH control is set to its center click-stop position.
Many other fixed-head recording systems were tried but all required an impractically high tape speed.
The tape speed is controlled to 60 mm / sec by the steel roll speed.
This control is used to adjust the tape speed plus or minus 10.
Tape speed should be stable to within not more than 10 % of the tape speed used.
Set the start time, end time, channel and tape speed as in step 3.
Hold down TAPE SPEED for about 1 second to change tape speed to SP / SLP page 11.
The following discussion is made with respect to tape speed at 20x normal speed.
This required the system to run at a high tape speed of 11.26 inches per second.
O At the fully counterclockwise position, the tape speed is approx . 12 % slower.
You'll also be interested in:
Examples of using Tape
Show more
Tape stops in the middle of recording or playback
I got the tape off the victim
Tape that right on top of that valve
Examples of using Speed
Show more
The speed of the vacuum source shall be
I must have hit speed dial by mistake
Zoom speed is determined by the amount of rotation
