Examples of 'tape to hold' in a sentence
Meaning of "tape to hold"
The phrase 'tape to hold' typically implies using tape as a means to secure or fasten something in place. It suggests using adhesive tape as a makeshift method to keep objects or materials from moving or falling
How to use "tape to hold" in a sentence
Basic
Advanced
tape to hold
Use clear tape to hold the windscreen on.
It stillleft plenty of red tape to hold up trade.
Tape to hold dressings and bandages in place.
Thanks to all this duct tape to hold it together.
Tape to hold the hair in place.
Use double stick tape to hold to the key in place.
Fix the rod and leave enough space of the tape to hold the glue.
Use sticky tape to hold them in place.
Just put them on some masking tape to hold them.
Use an adhesive tape to hold the end of the rope to the drum.
The neck of the bladder was ligated with the umbilical tape to hold the transducer.
Use a piece of adhesive tape to hold the sensor attached to the skin.
Another common method is to use packaging tape to hold your layers together.
Use tape to hold the parts tightly together while the glue is hardening.
Now use the floral tape to hold them together.
See also
Use clamps or tape to hold the block in position until the epoxy fully cures.
Clean excess glue, then use low tack tape to hold in position.
Use low-tack tape to hold the gear doors in position.
If the splint loosens, you may apply additional tape to hold the splint in place.
Use low-tack tape to hold the tail cone in position.
Allow 20 minutes for the adhesive tape to hold EasyCall properly.
Use low-tack tape to hold in the cowling to drill the mountings holes.
Use a piece of masking tape to hold the device to the wall.
Use low-tack tape to hold the fl ap in position until the epoxy fully cures.
Use a bandage or bandage tape to hold it in place while you sleep.
Use low-tack tape to hold the extension in position while routing it into the fuselage.
He just uses masking tape to hold them together . laughs.
Use low-tack tape to hold the elevator in position while the epoxy fully cures.
Use a piece of low-tack tape to hold the aileron in position.
Use low-tack tape to hold the lenses in position until the adhesive fully cures.
You may need to use tape to hold the z-bar in place.
Use low-tack tape to hold the windows in position until the glue fully cures.
Instead, you use athletic tape to hold them in place before each use.
Use low-tack tape to hold the stabilizers in position until the epoxy fully cures.
Use a blue “ 3M ” adhesive tape to hold the planks in place.
Use low-tack tape to hold the fin in position until the epoxy fully cures.
I tried using tape to hold it upright, but.
Use low-tack tape to hold the fi n securely in position while the epoxy fully cures.
Use low-tack tape to hold the canopy in position until the adhesive fully cures.
Use low-tack tape to hold the canopy in position until the glue fully cures.
Use low-tack tape to hold the torque rod in place until the epoxy fully cures.
