Examples of 'target surface' in a sentence
Meaning of "target surface"
Target surface - This phrase refers to the specific area or object that is the intended focus of an action or process. It implies that there is a particular surface, either physical or metaphorical, that is being aimed at or subjected to a specific treatment, such as cleaning, painting, or targeting in advertising or marketing campaigns
How to use "target surface" in a sentence
Basic
Advanced
target surface
Laser point must be completely on target surface.
The target surface is too dark.
Aim the laser beam at the target surface.
The target surface is too shiny.
This depends on the reflectivity of the target surface.
The target surface shall be.
Single cotton yarns were used as the target surface.
You have a target surface area of eight square inches.
The composition is sprayed on a target surface.
The target surface is too brightly lit by the sun.
In the latter case the target surface would be multifacetted.
The target surface is also by way of example a target plane.
They are emitted from the target surface in all directions.
Product applicators are designed to deliver a quantity of product to a target surface.
Measure the target surface under the following conditions.
See also
It was designed to be fired from submerged submarines to target surface ships.
The sputtering target surface in this mode is predominantly metallic.
Warhead for generating a blast on an extended region of a target surface.
Still air and hard target surface for accurate measurement.
Method for creating a diffractive optical effect on a target surface.
Thus the major part of the target surface can be utilized.
The target surface may be formed from a mixture of the materials.
The viewing área provides a target surface to join a transferable label.
The reflectance factor response is a peculiar property of each target surface.
The upper surface of the target surface may be rough or smooth.
There are various techniques for forming such materials on a target surface.
It is also possible to reduce the target surface to increase the measurement precision.
Remove the barrier between the unit and the target surface.
Said portion of the target surface will be preferred to as the focal region.
This provides complete coverage of the target surface support layer.
The target surface may be planar and is then designated the target plane.
A telemeter is used to measure the distances between a sequence of points on a target surface.
The light rays are reflected on the target surface towards adjacent receiving fibres.
In this week we have seen how we can fit a model to a target surface.
It also reflects light from target surface towards proximal end of illumination device.
This is a real advantage when designing a composition to have a target surface tension.
This composition when sprayed onto a target surface does not leave unsightly milky residues.
The particles may be dispensed into the atmosphere or onto a target surface.
The target surface can be oriented so that gravity will drain off unwanted liquid.
Laser marking involves irradiation of the target surface with laser light.
The target surface and the rear of the magnetic sheet must be clean and dry.
The resulting suds can be useful for cleansing the target surface.
A substantially uniform light distribution incident on a target surface should be interpreted as a substantially uniform illuminance.
Never aim the beam at a person or object other than the target surface.
The particles therefor proceed into the target surface and enter the cells thereof.
Make sure there are no obstructions between the unit and the target surface.
A semiconductor laser beam is reflected off the target surface and passes through a receiver lens system.
It is possible that this compensation assists in creating a more homogenous coating of a target surface.
Evaluating the correspondence between the target surface and the reconstructed surface from the displayed residual.
This can be observed as a substantially uniform illumination of the target surface during deposition.
You'll also be interested in:
Examples of using Target
Show more
Your target is the fifth detainee to exit
Fund registration in the target distribution country
The target group has mainly been children
Examples of using Surface
Show more
An uneven surface increases the risk of overturning
Where ϑ is the measured test surface temperature
All feasible surface and subsurface ECVs
