Examples of 'temperature was reduced' in a sentence
Meaning of "temperature was reduced"
temperature was reduced - a statement indicating a decrease in temperature from a previous level
How to use "temperature was reduced" in a sentence
Basic
Advanced
temperature was reduced
As temperature was reduced light became less of a factor.
After half an hour, the temperature was reduced.
The temperature was reduced and mixing was continued for two hours.
As soon as the reactor began to reflux, the temperature was reduced until refluxing stopped.
After the temperature was reduced and the pressure was relieved, PP powder was removed.
While bubbling with nitrogen, the interior temperature was reduced to 0°C.
Then, the still temperature was reduced with the total reflux condition.
Great amount of solid was precipitated, and the temperature was reduced to below 0°C.
After 24 hours, the temperature was reduced to room temperature and the vacuum released.
Toluene was then stripped in house vacuum and the temperature was reduced to 90 °C.
The temperature was reduced to about 35°C and the perfume was added.
After the obtention of a homogeneous phase the temperature was reduced to 50 °C and ubidecarenone was added.
The temperature was reduced to 50°C and the nonionic surfactant added.
The mixture was vigorously stirred with a turbine and then the temperature was reduced to 65 ° C.
The temperature was reduced to 92°C and the fractionating column removed.
See also
The flask was placed in a cooling bath kept at about -10 °C and the temperature was reduced.
Then the reactor temperature was reduced to 70°C and the nitrogen flow was stopped.
At that point, the reaction was completed and the temperature was reduced to approximately 65°C.
The temperature was reduced to 65°C and the samples were allowed to equilibrate for 5 minutes.
Bed temperature only affected the oil retention when the temperature was reduced to 625°C.
Thereafter the temperature was reduced to -15°C such that the carbonated composite solidifies.
At this concentration the HSPC formed a gel when the temperature was reduced to 20°C.
The reaction temperature was reduced to 80°C then the reaction mixture was placed under vacuum overnight.
After this period, 300 mL triisobutyl alcohol was added, and the reactor temperature was reduced.
The jacket temperature was reduced to 35°C and the DMSO was allowed to cool.
Since no solids had formed, the temperature was reduced to -9°C.
The temperature was reduced compared to NMR experiments with TFPI160 to improve spectra quality.
The reaction mixture temperature was reduced to 40 °C.
The temperature was reduced to 0°C over 2 hours.
The solution quickly became homogeneous and the temperature was reduced to about 120°C.
The temperature was reduced to 28°C to give a clear solution.
The suspension was stirred for a farther 1 hour, during which time the temperature was reduced to 22°C.
The temperature was reduced to 25 ° C. and the pH to 4 until the end of culture.
Example 7 was repeated, except that the temperature was reduced to 0 ° C.
The reactor temperature was reduced to 50 to 55 °C and the reactor contents were filtered.
The reactor was then purged with N2 for one hour and the temperature was reduced to 120°C.
The temperature was reduced to 120°C then the octanoic acid was added.
After sulphurization, the temperature was reduced to 330 ° C. and the test feed was injected.
The temperature was reduced to 90°C and stirring continued for an additional 90 minutes.
After dispersal, the temperature was reduced to 20°C and the stirring was stopped.
The temperature was reduced to 20 °C and the desired polymorph was precipitated slowly over 48h.
After the kettle temperature was reduced to -16°C, the recirculation flow was stopped.
The temperature was reduced to 60°C and 0.8 grams of dibutyltin dilaurate was added to each mixture.
Thereafter, the temperature was reduced to 560°C and allowed to stabilise for two hours.
The mass temperature was reduced to about 165°C at the outlet of the machine.
Once the temperature was reduced to below 80°C, the contents could be discharged.
The batch temperature was reduced to 75 ± 5 °C and the batch was sampled for IPT analysis.
The temperature was reduced to 0°C.
The reactor temperature was reduced to 400°C and 2-methylnaphthalene was fed to the reactor concurrently with H ₂.
After drying, the temperature was reduced to 45 C and He gas was replaced by N2.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Reduced
Show more
The original should be reduced as little as possible
Reduced throughput time from production to delivery
Border delays must be reduced as much as possible
