Examples of 'tempering temperature' in a sentence
Meaning of "tempering temperature"
tempering temperature: This phrase describes the controlled heating and cooling process used in metallurgy to improve the hardness and elasticity of metal
How to use "tempering temperature" in a sentence
Basic
Advanced
tempering temperature
The effect of tempering temperature on hardness.
The carbides can be made spherical to some degree by increasing the tempering temperature.
Below the original tempering temperature of the plate.
Tempering temperature is sort of logrithmic while time at temperature is linear.
Ion nitriding at a temperature below the tempering temperature used is preferred.
Increasing tempering temperature and time results in higher water absorption.
It is also possible to etch parts at a low tempering temperature without degrading them.
The tempering temperature than has to be increased ;.
The amount of time held at the tempering temperature also has an effect.
The volume ratio of retained austenite can also be reduced by adjusting the tempering temperature.
On the tempering temperature.
Fig . 2 discloses the tensile properties as a function of the tempering temperature.
Holding time at the tempering temperature should be minimum 2 hours.
However, the sphericalization of carbides caused by the increase in tempering temperature has a limit.
Further, if the tempering temperature is low, dislocation density is not decreased.
See also
Figure 5 shows the mechanical properties as a function of tempering temperature for a random example.
The higher tempering temperature is obtained in a radiation heating furnace, following the pre-heating furnace.
Moreover, the blade heating generates a surface temperature close to tool steel tempering temperature.
The preferable tempering temperature is the Ac1 transformation point or lower.
Reference Numeral tH in Table 2 denotes a soaking time ( minutes ) at the tempering temperature TH.
In tempering, the tempering temperature is equal to or lower than AC1 point.
Tempering temperature in °C.
The soaking time of the tempering temperature is preferably 15 to 120 minutes.
The tempering temperature can be reduced to 100 °C if greater hardness is required.
The lower limit of the tempering temperature is preferably 660°C.
The tempering temperature for each of these test numbers is 700°C or above.
The upper limit of the tempering temperature is preferably 700°C.
When the tempering temperature is constant, the Larson-Miller parameter is defined by following Formula ( 3 ).
In contrast, when a tempering temperature exceeds 480°C, the amount of carbide precipitated at grain boundaries increases.
You'll also be interested in:
Examples of using Temperature
Show more
Manufacturer of the separate temperature measuring equipment
Actual temperature below low temperature value
Select the desired temperature with and
Examples of using Tempering
Show more
But it also means tempering it with encouragement
Tempering may also be performed on normalized steels
Hardening and tempering substances for metals
