Examples of 'tensile and compressive' in a sentence
Meaning of "tensile and compressive"
Tensile and compressive: Terms used to describe different types of forces that act on materials. Tensile forces stretch or elongate materials, while compressive forces squeeze or shorten them. Understanding these forces is essential in engineering, architecture, and material science for designing structures and components
How to use "tensile and compressive" in a sentence
Basic
Advanced
tensile and compressive
The tensile and compressive forces it is capable of withstanding.
Type of end coupling indicating tensile and compressive forces.
Both tensile and compressive strains were applied on TFTs.
The neutral axis separates regions of tensile and compressive bending stresses.
If not the tensile and compressive forces can develop within.
The result is less embrittlement of the panel to tensile and compressive forces.
This deformation cause tensile and compressive stress within the material.
Longitudinal elements are provided for absorbing longitudinal tensile and compressive forces.
Metals tend to have tensile and compressive strengths that are very similar.
Solar cells in neutral phase are especially protected against tensile and compressive loads.
Compensates tensile and compressive loads and can be individually adapted to its purpose.
This engagement part can absorb both tensile and compressive forces.
These tensile and compressive stresses cause tensile and compressive strains respectively.
Such fibers have a far higher tensile and compressive strength than titanium.
Tensile and compressive static testing shows that both formulations have very different behaviours.
See also
The calculations indicated the limits and extent of tensile and compressive zones.
Method for simultaneously tensile and compressive straining the channels of NMOS and PMOS transistors respectively.
The anchor system may hence absorb both tensile and compressive forces.
Birch has greater tensile and compressive strength than oak, for example.
Type of mechanical coupling and the nominal maximum design value of tensile and compressive forces.
A correlation model between the concrete tensile and compressive strengths is also proposed by the authors.
The tensile and compressive strength ensures a good mechanical strength of the fairing 5.
The model has been validated by comparison with tensile and compressive tests on representative specimens.
Thus the tensile and compressive strains can be represented us-where, ing Hooke 's Law.
A trade-off is therefore to be found between tensile and compressive stresses.
Due to its high tensile and compressive strength, BauBuche allows for considerably slimmer components.
Doors must be stable in themselves, since high tensile and compressive forces are encountered.
In this case, the tensile and compressive stresses are high.
The ceramic fibers are incorporated in the branches 82 for transmitting the tensile and compressive forces.
Optical fiber cables should resist tensile and compressive forces applied to the cable.
In operation, the valve stem 224 is subjected to varying tensile and compressive loads.
By these expedients, the tensile and compressive strength may be tailored for the particular application.
Curve B in FIG . 2 shows the distribution of tensile and compressive stresses in dielectric material B.
Figure 5 schematically shows how tensile and compressive stress is induced in a blade under a bending load.
This place was screwed into the tensile and compressive force measuring instrument ( Erichsen 391 ).
You'll also be interested in:
Examples of using Compressive
Show more
Development of compressive strength based on time days
And do not think we can be as compressive as you
A compressive dressing was applied without wrist immobilization
Examples of using Tensile
Show more
Mechanical tensile test prehoistable navigation lights
The main advantages of the tensile test are
Tensile test on parent material of the bottom
