Examples of 'tensile properties' in a sentence
Meaning of "tensile properties"
Tensile properties refer to the behavior of a material when subjected to tension, such as stretching or pulling, usually measured by parameters like tensile strength and elongation
How to use "tensile properties" in a sentence
Basic
Advanced
tensile properties
The tensile properties of all samples were comparable.
The elastomers have improved tensile properties.
The tensile properties of the samples were measured.
The comparative results of tensile properties are listed below.
Tensile properties at elevated temperature short transverse direction.
No significant differences in tensile properties or water imbibition were observed.
Tensile properties of not less than.
Determination of the purely tensile properties.
However the tensile properties are not directional.
Such films generally have poor tensile properties.
The tensile properties shall apply to longitudinal samples.
Their static and cyclic tensile properties were then evaluated.
The tensile properties of the composites were also analyzed.
The film did not show any useful tensile properties.
Specific tensile properties of selected materials.
See also
Specimens are tested at periodic intervals for changes in tensile properties.
The tensile properties were measured in the wet condition.
The importance of impact modification is in the resultant tensile properties.
The tensile properties protocol was as follows.
The steel sheets as annealed were subjected to a test for tensile properties.
The alteration of tensile properties by niobium is certainly not a surprise.
No correlation between polymer content and tensile properties could be seen.
Tensile properties at different temperatures.
No membrane having high tensile properties is obtainable from this range.
Tensile properties are best representative of how the articles feel.
Increasing crystallinity affects the tensile properties and tear resistance of films.
The tensile properties were measured parallel to the rolling direction.
The resulting cable shows good tensile properties with excellent flexibility.
The tensile properties of all fibre samples were closely similar.
Mechanical fibering and crystallographic texture influence tensile properties in each direction.
The tensile properties were measured.
Another motivation for drawing may be a need for high tensile properties.
The tensile properties of the paper so made were then compared.
Failure in this test is determined by the observation of the loss of tensile properties.
The data shows that tensile properties are improved by vulcanization.
Generally these films had excellent puncture resistance and tensile properties.
Tensile properties of the web.
My first task will be to test the tensile properties of the steel you use.
Tensile properties of plastics.
Such a structure may reduce tensile properties and cause pitting on machined surfaces.
Tensile properties are good.
The resulting formulation was cured and the tensile properties were determined as described above.
These tensile properties are all desirable for apparel textile applications.
The resulting formulations were cured and the tensile properties determined as described above.
The tensile properties are highly dependent on the hard segment content.
Effect of polymer additives on the development of the tensile properties of paper during drying.
Tensile properties of the polymers produced were determined in the following manner.
Utilizing lower molecular weight polyethylenes resulted in decreased tensile properties and elongation.
The tensile properties of the polymers after they were hydrogenated were determined.
These test methods cover the determination of the tensile properties of structural panels.
You'll also be interested in:
Examples of using Properties
Show more
Check the acoustic properties of the medium
These properties will be useful in refrigeration equipment
If marked the below properties will be available
Examples of using Tensile
Show more
Mechanical tensile test prehoistable navigation lights
The main advantages of the tensile test are
Tensile test on parent material of the bottom
