Examples of 'tenter' in a sentence
Meaning of "tenter"
tenter (noun): A machine or apparatus used in the textile industry for stretching and drying fabric to prevent shrinkage.
Show more definitions
- A framework upon which cloth is stretched and dried.
- One who takes care of, or tends, machines in a factory; a kind of assistant foreman.
- A kind of governor, or regulating device.
- To stretch cloth on such a framework.
How to use "tenter" in a sentence
Basic
Advanced
tenter
Tenter frame dryers are well known in the art.
The apparatus may be a tenter or belt style line.
Use of tenter frames have four severe limitations.
The fabric is then placed on a tenter frame and dried.
Tenter frames are commonly used.
All stretching was done in the tenter.
The tenter frame oven may have additional zones.
Such a stretching method is referred to herein as simultaneous biaxial tenter stretching.
This stretching normally is accomplished by tenter framing or one of a variety of bubble techniques.
The trial was conducted in a sixty inch continuous pilot tenter line.
A tenter to minimize and control shrinkage during these steps is also desirable.
The fabric is heat set with a pin tenter after drying.
The configuration of the tenter can be varied depending on the stretching ratios desired.
Drying of the material was accomplished using the same tenter frame dryer just described.
A tenter frame process can also be used to heat and stretch the film.
See also
Do no tenter.
Traditional stretching equipment associated with wide web products include conventional draw rolls and tenter frames.
The film is then put through the tenter operation to fully orient the film.
Specific techniques of biaxial orienting treatment include tubular biaxial orientation and tenter biaxial orientation.
Tenter Street is a concern that makes money.
Uniaxial stretching can be performed using rolls with a roll or tenter for restraining the film.
Tenter frame ovens are known in the Art.
TD orientation is in a heated tenter frame.
Third, use of tenter frames is generally limited to straight stretches of the processing line.
There was a part of my life before Tenter Street full of cruelty and sadness.
The stretching method is not limited ; however, it is preferable to use a tenter.
The film may be produced by casting, a tenter frame process or blowing.
The organic lubricant was volatilized, and the extrudate was processed in a tenter frame.
The same passkey is not entered . tEnter the same passkey correctly both.
Thereafter, the coating composition is dried by passing the film through tenter ovens.
By using two orientation sections, the tenter is capable of a ten times maximum draw.
The stretching in the cross-direction is generally carried out in a tenter frame oven.
Five tenter animal-shaped chicken nuggets, lightly breaded and served with a delicious dip.
When we are now quite recovered at Tenter Street.
The TD was a standard tenter frame with a 3 zone oven.
The biaxial orientation is carried out simultaneously in both directions, by a simultaneous tenter frame.
Figure 2 is a schematic illustration showing a sequential tenter film process for making shrink film.
Tenter annealing above the polymer crystallization temperature with the apparatus in Figure 1 strain induces crystallization.
Uniaxial stretching methods include rolls, and a roll or tenter for restraining the film.
Indeed . Tenter Street is a concern that makes money.
Alternatively, foams may be stretched in both the machine and transverse directions in a tenter apparatus.
Men were sent to Tenter Street for him, sir.
The flat tape is then heated and stretched ( uniaxially or biaxially ) using the tenter frame.
Tenter Street is a concern that makes money . Good money.
They allow improving barrier shrink properties by orienting further on tenter frame or double-bubble film.
The pin tenter had 6 zones operated as follows,.
OPET films are manufactured by an orientation process utilizing tenter frame or " double bubble " techniques.
The tenter operation additionally " thins " the sealant.
The cast web was continuously oriented by conventional sequential length orienter ( LO ) and tenter equipment.
Typical commercial orientation processes are BOPP tenter process, blown film, and LISIM technology.
