Examples of 'terminal marked' in a sentence
Meaning of "terminal marked"
Terminal marked refers to a specific point or location that has been designated or labeled in some way. It indicates that the terminal, which could be an endpoint, device, or destination, has been clearly identified or indicated for easy recognition or reference
How to use "terminal marked" in a sentence
Basic
Advanced
terminal marked
Connect the ground to the terminal marked.
The terminal marked is connected to the chassis and safety earth ground.
Exceptions to the negative battery terminal marked n or.
The terminal marked positive is at a higher electrical potential energy than g66 the terminal marked negative.
Red cable goes to the terminal marked with plus sign.
Remember to connect the safety circuit to the connection box terminal marked with.
External wiring connected to any terminal marked with this symbol must be a “ ready made cable ”.
This connection is carried out between different appliances with the terminal marked by the symbol.
Terminal marked with the letter E, or with the ground symbol.
The earth lead is connected to terminal marked with the symbol and.
If the motor is used in reverse the current travels from the terminal marked ⊖.
The terminal marked PWM A is the control output for a high-effi ciency pump.
Connect the earth wire to the relative terminal marked with the symbol.
Terminal marked with the letter “ N ” or coloured BLACK.
The earthing wire must be connected to the terminal marked with the symbol.
See also
Finally the S output terminal marked 17 is connected to the Q output of shift register 9.
Attach the black ground wire to the amplifier screw terminal marked Ground.
CONNECT BLUE coloured wire to plug terminal marked letter “ N ” or coloured black.
The phase conductor of the light is installed in the terminal marked I.
The antenna is connected to the terminal marked ( Antenna ) on the radio unit.
The phase conductor of the consumer is connected to the terminal marked L.
The Blue wire must be connected to the terminal marked N or coloured black.
This fused red power wire should be attached to the amplifier power terminal marked 12V.
CONNECT BROWN coloured wire to plug terminal marked letter “ I “ or coloured red.
On round cords the Green or White conductor should be fitted to the terminal marked ‘ N.
The bistable circuit comprises a clock input terminal marked by the letter H.
On flat cords the center wire is the Neutral conductor, fit to the terminal marked ‘ N.
The earthing wire ( PE ) must be connected to the terminal marked with the earthing symbol.
The light unit 's live conductor must be connected to the terminal marked I.
Connect the coaxial cable to “ LNB IN ” terminal marked at the rear of.
Remove black wire from thermal fuse and attach it to thermostat terminal marked “ 4 ”.
The neutral " blue " wire must be connected to the terminal marked with the letter N ;.
Connect the positive ( + ) terminal of the right loudspeaker with the red loudspeaker terminal marked „ RIGHT+ “.
Connect the brown ( Live ) wire to the terminal marked ‘ L ' or coloured red.
The live conductor must be connected to the terminal marked L.
The wire coloured brown must be connected to the terminal marked " L " or coloured red.
The brown wire must be connected to the terminal marked I.
The service lead neutral conductor must be connected to the terminal marked N together with the.
The blue wire must be connected to the terminal marked N.
The yellow / green earth wire must always be connected to the terminal marked with the symbol.
In this circuit the camera can be powered from the terminal marked J2.
Make the electric connections for the cooling device to the terminal marked J8 FAN.
The earth wire ( yellow / green ) has to be connected to the terminal marked with.
Connect the house power wire ( black ) to the terminal marked LI.
The ground lead must be connected to the pillar terminal marked “ GR. ”.
Remove white wire from temperature limit terminal marked “ 1 ” Note.
Place the black wire connecting tip in the terminal marked « COM ».
Note, If your receiver offers a choice of output impedances, use the terminal marked 8 or 8 ohms.
Neutral wire ( coloured blue ) to terminal marked N.
Live wire ( coloured brown ) to terminal marked I.
You'll also be interested in:
Examples of using Terminal
Show more
Oil storage terminal and port infrastructure
Police request a clearer path to the terminal
I saw a whole roomful of terminal cancer on my way in
Examples of using Marked
Show more
Marked interest in sound and willingness to experiment
But you are marked by the wizards energy
Marked on the tool or specified in the manual
