Examples of 'test bars' in a sentence
Meaning of "test bars"
test bars: Refers to the bars or lines used in a test or assessment to measure or display results. This phrase is commonly used in the context of exams, quizzes, or assessments to show performance levels
How to use "test bars" in a sentence
Basic
Advanced
test bars
Test bars were milled from the plaque.
All were subsequently molded into test bars.
Test bars are used in all other examples.
The mechanical properties of the test bars were determined.
Test bars were added into each of the cylinders.
Metallic examination was further performed on the tensile test bars.
Sintered test bars were prepared and then test drilled.
The molding tool was opened and the test bars removed.
The tensile test bars were examined in customary manner by tensile testing.
The sieved powder was uniaxially pressed into test bars at various pressures.
Of the test bars flame retarding and mechanical properties have been determined.
The low fired density was a result of insufficient boron in the fired test bars.
The test bars were evaluated using three point bending at a constant displacement rate.
Has been extruded into pellets and processed by injection moulding into test bars.
Standard test bars were molded to the standards required for the flammability tests.
See also
Quantities of these respective heats were investment cast to manufacture single crystal test bars.
A few select test bars were evaluated metallographically and tested for transverse rupture strength.
The blend was intimately mixed by passing through an extruder and molded into test bars.
Test bars were made from the granulate by injection molding and tested for flame retardancy.
This test generally involves producing mortar test bars of specified composition which comprise a test material.
ASTM test bars were prepared and were tested using an Instron tensile machine.
The results of these test bars are presented below,.
Test bars were then prepared by injection molding 3 oz.
From the resulting sheet, test bars were sawn.
Samples of the test bars after injection molding were analyzed by GPC for molecular weight.
Holnam low-alkali cement was also used to make the test bars.
ASTM Type IV tensile test bars are machined from these plaques and tested.
Finally, the optimised combination of heat treatments is tested with tension test bars.
The test bars had the following compositions,.
Wheels were tested-using the test procedures as described above for test bars.
Fully heat treated test bars were creep-rupture tested.
The test bars were examined in a three-point test to measure the compressive strength in bending.
A chemical analysis of the alloy used for the test bars revealed the following composition,.
Injection molded test bars were produced from the glassfiber-reinforced polyproylene compositions.
The strength and rigidity values of the test bars are shown in Table 3.
Panelists examined the test bars from standpoints of flavor, texture, and visual appearance.
FIG . 9 is a photo demonstrating different percentage of the blend in injection molded test bars.
The test bars were washed under controlled time and temperature for a total of 9 washes.
The samples were compounded and test bars were produced as described in Example 4.
The test bars are placed on a three point flexure jig, mounted on a universal testing machine.
The samples were dried and test bars were produced as described in Example 1.
Test bars were then prepared from the resulting granulate and the following properties determined,.
The density of the fired test bars was measured . The following results were obtained,.
Test bars were moulded using the conditions described in Example 1.
Due to foaming problems the test bars produced did not satisfay the UL 94 requirements.
Test bars for physical property measurements were prepared as described in Example 4.
The compounded samples were dried and molded into test bars as described in Example 1.
The test bars are characterized in Table 1.
TEST METHODS The molded specimens and test bars are subjected to the following tests,.
Test bars were made from the granular polymer composition in accordance with UL 94.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Bars
Show more
As a result side bars are shown on the screen
Bars and restaurants are always well frequented
I stopped at four bars got a new appreciation
