Examples of 'test fluid' in a sentence
Meaning of "test fluid"
test fluid: 'Test fluid' is a substance used in testing procedures to assess the performance, reactions, or characteristics of a system or product. This phrase is often used in scientific, engineering, or quality control contexts to describe the material employed to conduct tests or experiments
How to use "test fluid" in a sentence
Basic
Advanced
test fluid
The test fluid is dyed to facilitate measurements.
Isopropyl alcohol was used as the test fluid.
The test fluid is an analog formulated as described below.
Artificial menses is used as the test fluid.
The test fluid can be dyed to facilitate measurements.
Measure desired amount test fluid into the container.
The test fluid was normal saline.
Note any sludge or gel present in the test fluid.
The test fluid is air.
Open the stopcock and discharge the test fluid.
Add the test fluid to the calibrated separatory funnel.
The sample is then wet with an excess of the test fluid.
Test fluid is deionized water.
The retentivity is defined as the ability of a sample to hold test fluid.
The test fluid may be dyed to facilitate determination of the equilibrium point.
See also
The rotating cylinder was immersed into the dissolution test fluid.
Cotton wool saturated with the test fluid was used as rub cloth.
Lower efficiency is shown by higher torque measured using the test fluid.
Ml test fluid.
The nozzle also aids in dispensing the test fluid to a small área.
The test fluid was stable to alcoholic potassium hydroxide under the test conditions.
Another application of similitude is to replace the operating fluid with a different test fluid.
The jar was filled with test fluid which completely submerged the dumbbells.
The properties of some library members may change during exposure to test fluid.
The test fluid for the PUP capacity test is deionized water.
Fluid analysis devices must be calibrated frequently when used to test fluid samples.
The test fluid consist of a solution of paper dyes from Clariant Corporation.
A bacterial or fungal count above these levels indicated a failure to preserve the test fluid.
The test fluid for the PUP capacity test is Jayco synthetic urine.
Systems and methods of discriminating between a control sample and a test fluid using capacitance.
The vented test fluid is passed to vent conduit 5.
The metering pumps should be adjusted to deliver a nearly continuous quantity of Test Fluid.
The test fluid should be used within 4 hours of preparation.
Chemical / physical compositions of the test fluid.
Thereafter the flow of test fluid to the user 2 is reduced.
In the operational test, water was used as the test fluid.
Thereafter the flow of test fluid into the user 2 is reduced.
P = the perimeter of the film in contact with the test fluid.
Thus, the test fluid should contain surfactant as detailed below.
The sample was immersed in the test fluid for 5 minutes.
For determining hydrophilicity of the material, distilled water is used as the test fluid.
Additionally, some test fluid may get hung up on the test apparatus.
To ensure cooling during this test, a hot test fluid is necessary.
The so-called hot test fluid is drained after the engine test run.
Cotton wool was used as rub cloth, which was soaked with the test fluid.
At least one test fluid delivery line communicating with the at least one test zone ;.
To determine capillary sorption of water, distilled water should be used as the test fluid.
Multiple filter members adapted for serial test fluid passage may again be provided, if desired.
One weight percent of the formulated CLEAN & CLEAR was added to a portion of a test fluid.
The injected sample of test fluid forms a zone that is transported through a flow-through cell.
You'll also be interested in:
Examples of using Test
Show more
Mechanical tensile test prehoistable navigation lights
A test with tripping is compulsory on installation startup
Before the test we had art class
Examples of using Fluid
Show more
Only use hydraulic fluid in the cylinder
The fluid was too thick for a pericardiocentesis
Do not expose the fluid to an ignition source
