Examples of 'tfts' in a sentence
Meaning of "tfts"
TFTs stands for Thin Film Transistors. It is a type of transistor used in flat-panel displays. In English, it is used as a noun to refer to such transistors
Show more definitions
- plural of TFT
How to use "tfts" in a sentence
Basic
Advanced
tfts
Both tensile and compressive strains were applied on TFTs.
The TFTs manager will delete the relevant TFTs.
To the TFTs and.
The row demultiplex circuit for a single row comprises six TFTs.
The operation of these TFTs and capacitors is described below.
Liver and TFTs.
Extra flat TFTs for tableaus with low installation depth.
The first step of this work consists in studying the electrical stability of TFTs.
This unit has some inactive TFTs within acceptable tolerances which.
The TFTs use CdSe as the semiconductor and use the bottom gate for row selection.
Packets not matching the QoS TFTs may be sent on best effort flows.
TFTs are also prioritised using evaluation precedence indices.
We have observed that such passivation can degrade the TFTs rather than protecting them.
TFTs can be made using a wide variety of semiconductor materials.
The transistors used may be MOS transistors or TFTs for example.
See also
Such transparent TFTs ( TTFTs ) can be used for construction of video display panels.
This may be done by packet filters similar to the TFTs defined in EPS.
Finally, random-network TFTs fabricated from the individual tubes approach the uniformity of ideal computer-simulated systems.
A problem arises when trying to configure the TFTs in the GGSN for downlink packet traffic.
The drive circuit was formed by low-temperature polysilicon TFTs.
The two most common types of LCD TFTs are the IPS and TN screens.
In this instance, it may be desirable to implement the extra transistors as TFTs.
Thus, it is possible to have static TFTs or dynamic TFTs.
TFTs work until a radius of 1 cm and fail after.
Preferably, the three transistors are identical and are thin-film transistors, TFTs.
TFTs have a gate, a source and a drain.
The result is the active plate of Figures 1 and 4 including an array of TFTs.
An array of TFTs 9 is provided as illustrated in Figure 1 for AMLCD 2.
A delay caused by channel parasitic capacitances ( Cgs and Cgd ) and channel capacitance ( Cchannel ) of TFTs.
Active-matrix displays driven by TFTs based on a low-temperature polycrystalline-silicon ("LTPS") process instead of amorphous silicon.
Adapter - and Controller-Boards for TFTs.
The normalized On-current shows standard deviation of ~25%, showing unprecedently high uniformity for random network TFTs.
